Oldest posts shown first (Show Newest First) | (Print Booklet) |
๐ฌ Re: A different Huntsman
2 years ago by ๐ฌ๐ง Colin H ( Fleet Admiral)
โง 221 Views ยท 3 Likes
Flag
That's a great start, looking forward to the next installment.
I usually skin from keel outwards, which works well for me. Cheers Colin. ▲
โฉโฉ
stevedownunder
MouldBuilder
Newby7
|
๐ฌ Re: Deck
2 years ago by ๐ฆ๐บ canabus ( Midshipman)
โง 216 Views ยท 3 Likes
Flag
Hello
My last boat, I skinned the bottom first and added the spray rails. Next I installed the side skins and added the chine rails. Last was the deck skins. I found because I could clamp the spray and chines rails a lot easier as I went !!!! Canabus Only 72 and still learning !!! ▲
โฉโฉ
stevedownunder
mturpin013
Madwelshman
|
๐ฌ Re: Skins
2 years ago by ๐จ๐ฆ Newby7 ( Fleet Admiral)
โง 205 Views ยท 0 Likes
Flag
Thanks Chris yes will be modifying the transom to be able to put the drive in.
Rick ▲
โฉโฉ
No likes yet
This member will receive 1 point for every like received |
๐ฌ Re: Skins
2 years ago by ๐ฌ๐ง ChrisF ( Lieutenant Commander)
โง 211 Views ยท 2 Likes
Flag
Somehow I missed the start of this but great stuff Rick, you certainly don't hang about!
The Huntsman 31 is a nice looking hull but that flared bow can be difficult. Mine's a bit bigger at 31" and I managed the double curvature using some very thin ply which I had to put some slits in and an extra frame. Bit of P38 and it doesn't look too bad. Are you going to modify the transom and fit a stern drive? Chris ▲
โฉโฉ
stevedownunder
Newby7
|
๐ฌ Re: Sides 2 & Power
2 years ago by ๐ฌ๐ง BOATSHED ( Lieutenant)
โง 182 Views ยท 0 Likes
Flag
Wow thats, |I'm stuck for words. SEXY. I love the Idea of outdrives. I fitted one to a 1970's HydroFibre Pipedream, (which I bought 2 of these hulls) back then it was fitted with the outdrive styled on the Volvo Outdrive. The trouble was to get a boat of 52" powered well a 15cc was too heavy on the rear end. So I took it off. I have now 50 years on fitted a different outdrive on and I am going to try a Brushless on it. I had planed to fit my blinged up Zenoah 26cc in the centre of the boat to level it up but everywhere seems to be๐ banning IC powered boats๐ค now.
▲
โฉโฉ
No likes yet
This member will receive 1 point for every like received |
Login To
Remove Ads ๐ฌ Re: Sides 2 & Power
2 years ago by ๐จ๐ฆ Newby7 ( Fleet Admiral)
โง 203 Views ยท 0 Likes
Flag
Thanks Colin Will do a side picture.
Rick ▲
โฉโฉ
No likes yet
This member will receive 1 point for every like received |
๐ฌ Re: Sides 2 & Power
2 years ago by ๐จ๐ฆ Newby7 ( Fleet Admiral)
โง 203 Views ยท 0 Likes
Flag
Hi Chris Was thinking of using gasket material on both sides of the unit. My other thought was a bead of silicone. Work in progress.
Rick ▲
โฉโฉ
No likes yet
This member will receive 1 point for every like received |
๐ฌ Re: Sides 2 & Power
2 years ago by ๐ฌ๐ง ChrisF ( Lieutenant Commander)
โง 208 Views ยท 2 Likes
Flag
Have you screwed the prop all the way on? I've only screwed mine on so far as it's very tight and didnt want to damage the threads.
Also be interested on how you are going to make it watertight. When I did a bath test water came in via the mounting screws. I'm thinking of making a rubber gasket. Chris ▲
โฉโฉ
stevedownunder
Newby7
|
๐ฌ Re: Sides 2 & Power
2 years ago by ๐ฌ๐ง Colin H ( Fleet Admiral)
โง 206 Views ยท 1 Like
Flag
Good progress, can you give us a side view of the drive system looks very compact.
Cheers Colin. ▲
โฉโฉ
Newby7
|
๐ฌ Re: Sides 2 & Power
2 years ago by ๐จ๐ฆ Newby7 ( Fleet Admiral)
โง 204 Views ยท 1 Like
Flag
The unit comes from a German company Bauer-Modelle.com.
Rick ▲
โฉโฉ
stevedownunder
|
๐ฌ Re: Sides 2 & Power
2 years ago by ๐ฌ๐ง mturpin013 ( Admiral)
โง 211 Views ยท 3 Likes
Flag
Hi there Rick, an interesting power system, have you any further detail on the unit
▲
โฉโฉ
Redpopman
Newby7
stevedownunder
|
๐ฌ Re: Power
2 years ago by ๐จ๐ฆ Newby7 ( Fleet Admiral)
โง 181 Views ยท 1 Like
Flag
Hi Stephen I think it may be optical as it is low as it can go.
HOW LOW CAN YOU GO. LOL Rick ▲
โฉโฉ
stevedownunder
|
๐ฌ Re: Power
2 years ago by ๐ฆ๐บ stevedownunder ( Captain)
โง 181 Views ยท 1 Like
Flag
Hi Rick,
That is rapid progress, great work. To me it looks like the drive unit is sitting too high, not enough prop in the water when plaining, it might be an optical from where I looking, just a thought. Cheers, Stephen. ▲
โฉโฉ
Newby7
|
๐ฌ Re: Sides 3
2 years ago by ๐ฌ๐ง BOATSHED ( Lieutenant)
โง 184 Views ยท 0 Likes
Flag
The brass prop is a lovely looking prop but wouldn't a sports prop be better. That is the style prop I used on my RAF Crash Tender. You will proably findplaying with other props to get the runing that you want with the hull. With a straight shaft throught the hull I swapped about with quite a few props and a sport style nylon prop was the best.
I look forward to seeing some video on her miaden runs. ๐ ▲
โฉโฉ
No likes yet
This member will receive 1 point for every like received |
Login To
Remove Ads ๐ฌ Re: Sides 3
2 years ago by ๐ฌ๐ง ChrisF ( Lieutenant Commander)
โง 202 Views ยท 1 Like
Flag
Hi Rick
Did you go for the G-power 150 or a bigger one in the end? I see you've gone for a brass prop, whose make is it? I really must do some more on my boats! Chris ▲
โฉโฉ
BOATSHED
|
๐ฌ Re: Sides 3
2 years ago by ๐จ๐ฆ Newby7 ( Fleet Admiral)
โง 199 Views ยท 0 Likes
Flag
Thanks Colin the unit comes from Bauer- Modelle. com a German company.
Rick ▲
โฉโฉ
No likes yet
This member will receive 1 point for every like received |
๐ฌ Re: Sides 3
2 years ago by ๐ฌ๐ง Colin H ( Fleet Admiral)
โง 201 Views ยท 2 Likes
Flag
Really good progress shipmate, looking very neat.
I do like your power unit, where did you get it from. Cheers Colin. ▲
โฉโฉ
Commodore-H
Newby7
|
๐ฌ Re: Sides 4
2 years ago by ๐ณ๐ฟ jbkiwi ( Fleet Admiral)
โง 186 Views ยท 0 Likes
Flag
Looking good Rick.
JB ▲
โฉโฉ
No likes yet
This member will receive 1 point for every like received |
๐ฌ Re: Change
2 years ago by ๐บ๐ธ pressonreguardless ( Rear Admiral)
โง 180 Views ยท 1 Like
Flag
Rick, Nice Soldering ๐๐
Trev ▲
โฉโฉ
stevedownunder
|
๐ฌ Re: Change
2 years ago by ๐ฌ๐ง NigelTailyour ( Master Seaman)
โง 189 Views ยท 0 Likes
Flag
The pulpit looks very nice indeed. I finished mine off by buying a pack of 10 brass portholes.
"Hobbies" have then. Then I took the glass out and they make really good finish to holes that the wires go into. I also made the steps at the back and used the last 4 portholes for that. Last comment. I have not glued the pulpit or the rear steps in place. I have never had them come out except when I want to transport the boat. Its much easier to travel without those two items attached and easy to put in when sailing. ▲
โฉโฉ
No likes yet
This member will receive 1 point for every like received |
๐ฌ Re: Chine and Rub Rail
2 years ago by ๐ฌ๐ง ChrisF ( Lieutenant Commander)
โง 181 Views ยท 0 Likes
Flag
The mahogany makes sense and easier than planking!
▲
โฉโฉ
No likes yet
This member will receive 1 point for every like received |
Login To
Remove Ads ๐ฌ Re: Chine and Rub Rail
2 years ago by ๐จ๐ฆ Newby7 ( Fleet Admiral)
โง 179 Views ยท 1 Like
Flag
So right Ron we must keep the fingers moving in this cold winter season. Parquet would be something different.
Rick ▲
โฉโฉ
stevedownunder
|
๐ฌ Re: Chine and Rub Rail
2 years ago by ๐จ๐ฆ Ronald ( Admiral)
โง 177 Views ยท 3 Likes
Flag
Why not, itโs your boat, and am sure it will look very nice when done. Besides, in a cold Canadian winter, ya gotta have something to stimulate those brain cells, and keep them fingers moving. ๐
The fella who did the deck on this boat, used Cherry strips! Not original decking on a Lobster Yacht, but he did a fine job! I am sure, youโre welcome to finish as youโd like too as well. Enjoy, be creative, maybe do a parquet deck, now wouldnโt that be different. ▲
โฉโฉ
stevedownunder
Madwelshman
Newby7
|
๐ฌ Re: Chine and Rub Rail
2 years ago by ๐จ๐ฆ Newby7 ( Fleet Admiral)
โง 179 Views ยท 2 Likes
Flag
Thanks Chris for the pictures. As this is a Huntsman build but an imaginary finished design. Had the Mahogany in house decided to use up.
Rick ▲
โฉโฉ
stevedownunder
Ronald
|
๐ฌ Re: Chine and Rub Rail
2 years ago by ๐ฌ๐ง ChrisF ( Lieutenant Commander)
โง 183 Views ยท 3 Likes
Flag
|
๐ฌ Re: Chine and Rub Rail
2 years ago by ๐จ๐ฆ Newby7 ( Fleet Admiral)
โง 180 Views ยท 1 Like
Flag
Thanks Trev I do think a mahogany deck will look good.The wood frame is the one I will go with.
Rick ▲
โฉโฉ
Madwelshman
|
๐ฌ Re: Chine and Rub Rail
2 years ago by ๐บ๐ธ pressonreguardless ( Rear Admiral)
โง 182 Views ยท 1 Like
Flag
I like the wood screen better, Good work!!
The Mahogany deck and rail will be perfect!! Trev ▲
โฉโฉ
Newby7
|