Oldest posts shown first (Show Newest First) | (Print Booklet) |
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐บ๐ธ Bogiemail ( Able Seaman)
โง 69 Views ยท 1 Like
Flag
|
Login To
Remove Ads ๐ฌ Re: Dumas Mt Washington
2 years ago by ๐บ๐ธ pressonreguardless ( Rear Admiral)
โง 72 Views ยท 1 Like
Flag
Just curious, why you used a separate motor for the walking beam, instead of installing the offset ball socket on the drive motor to operate the Beam?
Trev ▲
โฉโฉ
stevedownunder
|
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐บ๐ธ Dumaspittman ( Petty Officer 1st Class)
โง 76 Views ยท 1 Like
Flag
Such amazing work! I have to be careful, I see such astonishing talent here, so many people with more ability in their pinky than I do..it can be incredibly discouraging. But I have to learn from the masters and learning is inevitable. Thanks for putting up such an impressive post, I really enjoyed it. ๐๐๐
▲
โฉโฉ
pressonreguardless
|
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐ฆ๐บ stevedownunder ( Captain)
โง 76 Views ยท 1 Like
Flag
Fantastic work Dave,
Little on the glossy side for me. I am guessing the small geared motor is for the beam engine? Cheers, Stephen. ▲
โฉโฉ
pressonreguardless
|
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐บ๐ธ DWBrinkman ( Lieutenant Commander)
โง 80 Views ยท 2 Likes
Flag
Beautiful Boat!
Dave B ▲
โฉโฉ
pressonreguardless
stevedownunder
|
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐ณ๐ฟ jbkiwi ( Fleet Admiral)
โง 79 Views ยท 2 Likes
Flag
Fantastic job !
JB ▲
โฉโฉ
pressonreguardless
stevedownunder
|
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐บ๐ธ pressonreguardless ( Rear Admiral)
โง 89 Views ยท 2 Likes
Flag
Hi River,
Great Documentation. ๐๐ Planking all of the decks is a nice touch! How did you like soldiering railing in plastic? We find a Way๐๐ Brass on the walking beam supports is a nice touch. I really like how you highlighted the embossments on the panels. I wanted to do that, however my hand wasn't steady enough. Kudos, Mate!! Trev ▲
โฉโฉ
stevedownunder
DWBrinkman
|
๐ฌ Re: Extra motor
2 years ago by ๐บ๐ธ pressonreguardless ( Rear Admiral)
โง 77 Views ยท 0 Likes
Flag
Good Idea!
The disassembling is a pain. Trev ▲
โฉโฉ
No likes yet
This member will receive 1 point for every like received |
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐บ๐ธ pressonreguardless ( Rear Admiral)
โง 77 Views ยท 0 Likes
Flag
Absolutely Right, Rick๐๐
Trev ▲
โฉโฉ
No likes yet
This member will receive 1 point for every like received |
Login To
Remove Ads ๐ฌ Re: Dumas Mt Washington
2 years ago by ๐จ๐ฆ Newby7 ( Fleet Admiral)
โง 90 Views ยท 2 Likes
Flag
So right. As builders it seems we are hard on ourselves. Not everyone will see the misssteps of the build. For me it's the fact that I built the boat to the best of my abillities. Give yourself a pat on the back keep building and showing.
Rick ▲
โฉโฉ
Norway
pressonreguardless
|
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐บ๐ธ pressonreguardless ( Rear Admiral)
โง 77 Views ยท 0 Likes
Flag
They do look great๐
Really makes a difference! Thanks for the Tip. You are right, when building we tend to focus on minutia, when looked on as a whole it all comes together Trev ▲
โฉโฉ
No likes yet
This member will receive 1 point for every like received |
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐บ๐ธ River Rat ( Captain)
โง 75 Views ยท 1 Like
Flag
Gary, Thanks for that tip. I have already tried it and it looks and works great! I am going to do it that way on my Mt Washington! So much easier for my sore little fingers. Heat shrink...who would have thought.....
▲
โฉโฉ
stevedownunder
|
Login To
Remove Ads ๐ฌ Re: Dumas Mt Washington
2 years ago by ๐บ๐ธ pressonreguardless ( Rear Admiral)
โง 64 Views ยท 1 Like
Flag
Great idea, Gary!
Spot on๐ Save a lot of time and fiddling. Thanks, Trev ▲
โฉโฉ
stevedownunder
|
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐ฌ๐ง GaryLC ( Captain)
โง 73 Views ยท 3 Likes
Flag
How about heat shrink, it works out well for me, and a damn sight less fiddly than binding wire, plus when correctly measured they look identical. Regards, Gary.
▲
โฉโฉ
RNinMunich
stevedownunder
pressonreguardless
|
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐ฌ๐ง GaryLC ( Captain)
โง 81 Views ยท 2 Likes
Flag
Definitely, a bit of artistic flair coming through there on those paddle box covers, and at the end of the day, it's the fine detail that makes all the difference. Well done you, great job. Gary.
▲
โฉโฉ
stevedownunder
RNinMunich
|
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐บ๐ธ pressonreguardless ( Rear Admiral)
โง 76 Views ยท 2 Likes
Flag
Hi Dave,
Beautiful job on the Wheel Boxes. Did you cut out the clear areas or just paint around them? As far as seizing lines I found that fine copper wire worked the best as it stays put once bent. Trev ▲
โฉโฉ
RNinMunich
stevedownunder
|
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐บ๐ธ pressonreguardless ( Rear Admiral)
โง 76 Views ยท 2 Likes
Flag
That's what I did with mine and of course I have to use my lit magnified headset๐ค๐ค๐ค๐ค
The cutouts on the wheel boxes makes a tremendous difference. Trev ▲
โฉโฉ
stevedownunder
Peejay
|
๐ฌ Re: Mt Washington Life raft details
2 years ago by ๐บ๐ธ pressonreguardless ( Rear Admiral)
โง 60 Views ยท 1 Like
Flag
Nice Touch, Dave๐๐
Trev ▲
โฉโฉ
stevedownunder
|
๐ฌ Re: Dumas Mt Washington
2 years ago by ๐จ๐ฆ Newby7 ( Fleet Admiral)
โง 70 Views ยท 1 Like
Flag
The decks have a good look with the finish you used. The build has turned out well Dave .Good luck with water testing and running.
Rick ▲
โฉโฉ
stevedownunder
|