All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
October 2018: 5 people September 2018: 13 people August 2018: 5 people July 2018: 8 people June 2018: 8 people May 2018: 7 people April 2018: 24 people March 2018: 13 people February 2018: 8 people January 2018: 9 people
No i started on the hull half way up level with the false deck you can see, I have laid the first few planks but it will be trial and error as this is my first attempt at planking had to shape a couple already but going well at the minute I am sure it will get tougher 😲
Hull now had two layers of planking never done it before but even if I say so it looks very good, have removed the building decks and fitted the motor and rudder servo just waiting for a reduction sprocket and timing belt , the deck is in place and all planked will publish pictures tomorrow onward and upward👍
Looking very good 👍 I see you have the keel clamped in a vice. Good, but one at each end might have been better!? Should limit/stop any tendency of the structure to twist. Don't release it until glue on the final planks is set! Otherwise normal practise to prevent twist is to plank upside-down (as Dave said) fixed to the building board, starting at the keel and working up on alternate sides. Looking forward to progress reports. 😎
Hmm! Looking closer I don't see any shaping of the outboard edges of the bulkheads!? 😲 This is essential to do before planking to ensure proper seating (greater glue contact area) of the planks and maintaining the correct hull shape. Use a medium grade sandpaper wrapped around a block of wood ca 2 x 1 and at least as long as the length along 3 adjacent bulkheads. If I've missed some detail please ignore the ramblings of an old man, if not ....! Cheers Doug 😎
Hi Dave I've just started this kit and although I have done modelling, rc model aircraft,for years I am still trying to get my head round planking the hull. I will be following your build closely, and if you don't mind post a photo or two in your build. Looking forward to more.