|Author: Jim Posts: 1 Photos: 37 Subscribers: 1 Views: 203 Responses: 3 | Most recent posts shown first (Show oldest first)|
Just started building from the plan.
Started the bottom skins today,had to do them in two parts.
Finished the bottom and side skins, fitted the propshaft and rudder tubes. Just give the inside of the hull a coat of epoxy.
Just fitted the brushless motor,took chance on the motor size and power.
I started on the decking using 1mm ply, when that's done i intend to plank over it.
Finished the planking today and started the hatch cover which will fit the cabin onto, the deck will be painted over.
Started work on the wheelhouse,the plan shows the front and sides being double skined with the glazing in the centre,using 1.6mm ply for the inside and 1mm plastic(palight)for the outside.
Will keep you posted on the outcome.
Changed my mind on putting the plastic part with the glazing on the outside and put it on the inside instead.
Did some more over the last few days, coming along slowly.
Attached Photos - Click To View Large