So here we go again! I have decided to give other projects a rest for a time in favour of this little gem. Pick up off eBay for less than £100 NIB posted, couldnt resist!
Its the Dumas (kit no:1203) 44' Coast Guard Lifeboat. I dont know if this kit is still produced by Dumas and having looked at the Die cutting of the parts, certainly seems like an old kit? However, I love my building and the challenges, so I am sure it will turn out nice at the end. Finished length 33".
I shall be converting this to a RNLI Waveney Class Lifeboat and will possibly go with 44-003 named "Khami" which was based in Great Yarmouth and Gorleston, which is local to me here in Suffolk. Sadly very little turns up on this boat via Google, but at some stage may pop out to the Great Yarmouth Lifeboat station and see if I can hunt anymore info on her.
I shall not be using the recommended Dumas running gear for 2 reasons, 1st its a geared set-up (I am going with MFA540 brushed direct drive) and the cost of over £150!
Photos show the box artwork, plans and the included wood. Last photo shows my electrics less propshafts and props that are on order. Note the Star Wars 3.75" figures that with poetic licence could be painted to represent crew. However, at this point the model is approx 1;16 scale and the figures would be 1:18 scale so maybe too small. There are 1:16 scale lifeboat figures available but pricey?
My one issue at this point is going to battery choice? do I go with a small 6v lead acid or perhaps 2 Tamiya type 7.2v NIMH in series. anyone who has built anything like this may want to advise. LIPO not an option as the Mtroniks ESC do not support LIPO. Space inside the hull may also be an issue?
Another issue is going to be fabricating some propshaft struts for the rear next to the props. There is quite a bit of prop shaft exposed outside the hull, so these would be integral to support and strength of the propshafts. Is there anything available off the shelf (they are included in the running gear set, but dont seem to be available on there own) of do I need to fabricate from brass tube and sheet/strip brass?
Attached Photos - Click To View Large