|Author: CB90 Posts: 1 Photos: 11 Subscribers: 0 Views: 55 Responses: 0 | Most recent posts shown first (Show oldest first)|
MAS 562 (Motoscafo Armato Silurante: Torpedo Armed Motorboat)
While Browsing the internet I came across a free plan dated 1969 if a Italian Motor torpedo boat
I found the craft interesting as it had a stepped hull, and this looked like a challenge, so more research and historical digging.
Built in 1941 by Baglietto, Varazze: built of wood (mahogany).
Baglietto, Varazze: built MAS 561 through to MAS 570
Baglietto class 500, 4th series"
Displacement 27.8 tons
Displacement max 28 tons
Propeller shafts 2
Machinery Isotta Fraschini petrol engines and Alfa Romeo or Cararo cruising petrol engines
Power, h.p. 2000 or 2300 / 140 or 100
Max speed 43 to 46 knots
Fuel tank 1.5 tons
Endurance 350 nautical miles at 42 knots
Armament 1 x - 13.2/76 or 1 x - 20/65 Breda 1940,
2 x 450mm Torpedoes ,
6 - 10 x Depth charges
Crew complement 13 persons
MAS 562, was captured by Germans 9/9/1943, transferred to RSI, was painted in disorientation camouflage, was captured by American PT' boats on June 30, 1944 and PT 306 towed the prize into Bastia. It was painted in disorientation camoflarge
It is one of the few to have survived the war and passed to the Italian Guardia di Finanza in the 1950's. In 1940 there were 48 MAS 500-class units.
The plan shows the gun on a box platform not the case on the real boat.
Making this boat so small has been a bit of a challenge.
Running gear 2x Graupner 600 8.4v about 70watts each at rated voltage.
2x shafts 2x opposite turning propellers (2 or 3 bladed)
3 blades on real boat. 35-40 mm
1 or 2 Batteries
The Model after studying plans and photographs I could see a few things that I could add to the plans.
A cambered deck
A revised transom shape (not square)
Two propshaft and two electric motors with air cooling.
A reduction in the number of frames /ribs as the boat I was going to make was only 29in (83cm) long.
the three main problems with the hull where :-
the new frame positions and
the thickness of the stringers the wood I used was too thick 12mm x 6mm for a small boat
Correct gun and position.
The Hull is now skinned I will upload some photos soon.
Attached Photos - Click To View Large