Cookies used in this website are gluten free, wheat free and dairy free. By using this website you agree to our use of cookies. More Info
Guest
Login Below
Join Us On Social Media!
   
Get The Model Boats App!
Apple App Store
Android app on Google Play


Help Support This Website
£
or enter custom amount

(Non Contributor)

Help support this free
website and donate.



£285 a year is needed to keep the website and apps online. Please consider donating £5 or more to help towards these fees.
All donations are securely managed through PayPal. Amounts donated are not published online.

Many thanks for your kind support.

Model Boats Website Team


Donation History
June 2018: 5 people
May 2018: 7 people
April 2018: 24 people
March 2018: 13 people
February 2018: 8 people
January 2018: 25 people
December 2017: 7 people
November 2017: 11 people


Unique Visitors This Month

Website Members

Terms and Conditions
Privacy Policy
Advertising
Contact


Model Boats Website
Active Users (6)
Login or Register
To Remove This Ad

Login or Register
To Remove This Ad
>> Home > Boat Building Blogs > Billings Waveney Class LifeBoat
>> Permalink
mdlbt.com/40488
Billings Waveney Class LifeBoat Print Booklet
Author: NickG   Posts: 7   Photos: 17   Subscribers: 3   Views: 533   Responses: 2   |   Most recent posts shown first   (Show oldest first)

mdlbt.com/41814
Preparing the Hull Part 4 - Posted: 16th May 2018
Have managed to get some plasticard from a local model shop and have put a strengthening bar at the front of the hull where the floor was cut out that will also act as a locating tab for the control room.

Attached Photos - Click To View Large


mdlbt.com/41551
Building the Control Room Part 2 - Posted: 4th May 2018
Finally I finished gluing all the windows together on the control room and put the roof on. I found this very tricky to get then lined up and at the correct angle, but eventually after sticking my finger together a few times, I managed to do it and get a result I'm happy with.

Attached Photos - Click To View Large


mdlbt.com/41116
Building the Control Room Part 1 - Posted: 15th Apr 2018
Haven't had time to go to the model shop to buy some plasticard so I decided to keep the project moving by starting to build the control room.

Firstly I carefully cut out the plastic base and plywood pieces before using some Deluxe Material Roket glue to glue everything together, however some sanding is going to be required once the glue has set to make all the edges smooth.

Attached Photos - Click To View Large


mdlbt.com/40673
Preparing the Hull Part 3 - Posted: 1st Apr 2018
I have glued the hull to the deck and smoothed all the outer edges to a smooth finish. Now it time to start work on getting the middle of the deck to fit back to the main deck so it's off to shop for some plasticard.

Attached Photos - Click To View Large


mdlbt.com/40536
Preparing the Hull Part 2 - Posted: 28th Mar 2018
Tonight I have cut off all of the excess parts of the hull and deck so they fit together and are ready for gluing. Once the hull and deck are glued together I will tidy up the outer edging as this is only been rough cut at this stage.

Attached Photos - Click To View Large

Response by RNinMunich on the 28th Mar 2018
Which end are the taps 😁 (faucets to our brothers over the Pond😉)

mdlbt.com/40492
Preparing the Hull Part 1 - Posted: 27th Mar 2018
As the kit is designed to be static, the first challenge is to be able to provide access to the hull to install and maintain the electric's and R/C equipment.

I choose to cut out the middle section of the top of the boat. A way of fastening this back to the boat will be decided later but this will give good access to the hull to be able to install prop shafts, electric's and R/C equipment.

Attached Photos - Click To View Large


mdlbt.com/40489
Billings Waveney Class LifeBoat - Posted: 27th Mar 2018
Waveney class lifeboat was designed in the USA, but after minor adjustments the vessel was used by the RNLI in British coastal waters. I managed to pickup 1/40th scale Billings Waveney Class Lifeboat Kit from Ebay for £25 including postage that had not been started.

This kit is designed for static display, but with some modelling skill it can be converted to R/C operation. This is now my challenge to convert this kit to R/C control and put as much detail on to as possible without spending fast amounts of money.

Attached Photos - Click To View Large

Response by Donnieboy on the 28th Mar 2018
It"s always great to see a static kit being turned into a runner.It can be challenging at first.All it takes is a good look at it and all the pieces come together.