All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
December 2018: 4 people November 2018: 11 people October 2018: 9 people September 2018: 13 people August 2018: 5 people July 2018: 8 people June 2018: 8 people May 2018: 7 people April 2018: 24 people March 2018: 11 people
I'm starting to build a Veron kit of the Vosper Rescue-target towing launch, which I bought on Ebay. This boat seems quite rare - well to me anyway - although Belair sell one currently which is similar but slightly larger (34in long - mine is 28in). The kit is obviously old and if anyone knows when these were sold then please let me know. The structure is balsa - not my favourite wood - and ply for the exterior. Balsa does not hold temporary or permanent pins well, and holding things in position while the glue dries is made more difficult. The balsa has been pre-cut to shape and several of the curved pieces are weak in places where the grain is inevitably across the length of the piece. I broke several parts and needed ply backing to repair. Glue used is 5 min epoxy. The keel is made up of several pieces and to get the right shape I photocopied part of the plan and laid the parts on that to set while gluing.
I understand the Veron RTTL kit was first sold around the late 1950s , early 60s. I got a boxed unbuilt one in 1995 from a local model shop whom had taken it in as part ex for another boat. I decided to build it instead of keeping it boxed as a collectors item. It was a nice lightweight boat which I powered with a brushed 550 motor running off a 7.2 Ni Cad. I held onto it for a couple of years before trading it in the same shop where I bought it for a fast electric kit.
With hindsight, I feel I should have kept the RTTL as they are very rare classic models now.
I have built this from the plans as per instructions using the balsa/ply fixing with UHU Hart and it works well and the boat performs well. Had to source fittings etc from many places and those I couldn't (DF cone) I 3d printed. Use a small geared motor from component shop to power the radar scanner.