Media Gallery

>> Home > Boat Building Blogs > Julieth 4 French fishing boat

---

>> Permalink mdlbt.com/47101 Julieth 4 French fishing boat Print Booklet

Author: canabus   Posts: 11   Photos: 75   Subscribers: 0   Views: 1090   Responses: 12   |   Most recent posts shown first   (Show oldest first)

---

Showing page 1 of 2   |   Jump to page: 1   2

---

mdlbt.com/49083 Wheelhouse - Posted: 24th Dec 2018 ✓ Like This Post   ( 4 )

Hi All Cracking on with the wheelhouse and playing with the LED lights. I drop the wheelhouse lights from 4.5 to 3 volts which made them look a bit more yellowish. Canabus Attached Photos - Click To View Large

mdlbt.com/48783 Vanishing - Posted: 12th Dec 2018 ✓ Like This Post   ( 2 )

Hi All Hot weather, so two coats of sealer and two coats of matt vanish. Deck finished and onto the wheelhouse. Canabus Attached Photos - Click To View Large

mdlbt.com/48746 Deck Planking - Posted: 10th Dec 2018 ✓ Like This Post   ( 6 )

Hi All Finished the deck, so a few coats of wood sealer and matt vanish in the next week. Canabus Attached Photos - Click To View Large

mdlbt.com/48544 More deck planking - Posted: 1st Dec 2018 ✓ Like This Post   ( 5 )

Hi Chaps A lot more planking added and still more to go!!! It's looking a bit smart of a fishing boat it's poetic license!!! Canabus Attached Photos - Click To View Large

mdlbt.com/48217 Deck Planking - Posted: 22nd Nov 2018 ✓ Like This Post   ( 6 )

Hi All Started the deck planking with veneer and added some LED lights. Canabus Attached Photos - Click To View Large

mdlbt.com/48030 Decking - Posted: 15th Nov 2018 ✓ Like This Post   ( 1 )

Hi All Installed the deck and filled around the edges. Gave the hull a quick run and it handle very well. Good turning circle and at 50% throttle still over scale speed. 3/4 throttle looks about right. About to start planking. Canabus Attached Photos - Click To View Large

mdlbt.com/47879 First Dip !! - Posted: 8th Nov 2018 ✓ Like This Post   ( 5 )

Hi All The boat had it's first ballast test today. Started with 14 and1/2 pounds and had to add another pound and 1/2. No leaks!!! Canabus Attached Photos - Click To View Large

mdlbt.com/47812 Update 2 - Posted: 6th Nov 2018 ✓ Like This Post   ( 2 )

Hi All Installed the rudder with oiler, also installed the 60 turn motor with metal joint from banggood. Installed the 4.5KG servo with linkage to the rudder. First coat of Matt 37 which showed up a few spots that require a bit of filling. Canabus Attached Photos - Click To View Large

mdlbt.com/47705 Update - Posted: 4th Nov 2018 ✓ Like This Post   ( 4 )

Hi All Finished the dingy, hatch, skylights and companion way. Added some paint, matt 131 green for the hull, under water the hull is matt37. Yellow for the trim bits with matt vanish for the wood work. Canabus Attached Photos - Click To View Large

mdlbt.com/47320 Bulwarks and Dingy - Posted: 21st Oct 2018 ✓ Like This Post   ( 4 )

Hi All Installed the bulwarks and started on the dingy which I added 19mm to the stern to match the hatch size. Canabus Attached Photos - Click To View Large

Showing page 1 of 2   |   Jump to page: 1   2