Today's wordle is waiting Wordle Today's clue: Relating to the ocean Play now
#5756 67
Wordle 28.6.26 My favourite 3 vowel 7 letter starter today 😄

😎
Young at heart 😉 Slightly older in other places.😊 Cheers Doug
Liked by hermank and RossM
#5755 71
As Stephen T said last week, make the puzzle port without using the clue. I looked at the 4 spaces and knew what the answer would be before clicking on the clue
Force nothing, waste nothing, leave nothing undone
Liked by hermank
#5754 72
Roy

Wha? U dont want yer lawn trimmed with a sail edger??

(visualize somebody with a electronic sized soldering iron, down on their knees, trimming the edge of the lawn, with a long, heavy duty extension cord, that goes back to the house)
Force nothing, waste nothing, leave nothing undone
Liked by hermank and RNinMunich
#5753 71
Hi Ross,
So Ai got his luffs in a twist😁
'Oooh naasty!'😦 As Sub Lt. Philips might say😆

😎
Young at heart 😉 Slightly older in other places.😊 Cheers Doug
Liked by hermank
#5752 71
Hi all, I was reading about AI and o/p, apparently it does get confused and imagines things. It is common enough for it to have a title, it's called Hallucination!
Dream on baby, just don't trim my lawn.
Roy
Liked by hermank and RNinMunich
#5751 69
AI confused LAWNS for LUFFS or LEECHES??

(edging lawns is probably more common than edging luffs and leeches)
Force nothing, waste nothing, leave nothing undone
Liked by Steves-s and hermank and
#5750 69
Thanks Ross👍
But why then did AI say 'a tool for trimming lawns' and not sails??😕

😎
Young at heart 😉 Slightly older in other places.😊 Cheers Doug
Liked by Steves-s and RossM and
#5748 69
Doug & luckyduck

I had to look up the connection:
An EDGER in Marine world is a hand tool used for trimming and flattening seams in sailmaking. I just use my finger a really sharp box cutter, a fine point 40W soldering iron or a flat iron
Force nothing, waste nothing, leave nothing undone
Liked by roycv and tomarack and
#5747 69
Re 'Wordle' 25.6: Methinks AI has finally gone over the edge!😏

😎
Young at heart 😉 Slightly older in other places.😊 Cheers Doug
Liked by Steves-s and hermank and
#5746 69
I got there but the connection escapes me! With 5 word wordles I start with AISLE. I do not attempt 8 or more ones as I cant think of successive words during the puzzle. Any tips anyone?
Roy
Liked by SouthportPat and jumpugly and
#5743 70
wordle of the day

I spent 50 years a a gardener. which has ltttle to do with ships
Force nothing, waste nothing, leave nothing undone
Liked by Steves-s and SouthportPat and
#5742 73
A hot cup of tea has more effect on me than iced tea or a long cool drink. It was very pleasant sitting in a gentle breeze in the garden for 20 minutes as well. The gradually cooled shower was great and I went straight off to sleep for 4 hours, but then decided a little longer might be beneficial as well!
Roy
Liked by hermank and muddy and
#5740 74
I just looked at your 7 day forecast with temperatures nearing 100F (98) and with no A/C I hope there are some cooling centers and public buildings available for you to visit.

I don’t understand why you would brew some tea if you were trying to cool off? I would understand if you were making Ice Tea but not a cuppa☕️😥
Liked by DWBrinkman and hermank
#5739 74
It is very hot here in Watford, I could not sleep, it was 2 o/clock, I gave up and got up made some tea. I answered the Q o D and found 4 others had already answered the question! So it was not just me? Or do we have a lot of late to bed members?
I have got used to just 6 hours sleep and a doze after lunch.
So model boat building tends to be an early morning session and another in the evening mixed up with the usual planned events and daily unexpected crises.
I am working on a small fishing boat bought on the auction bay partly spoilt by the previous owner. I have nearly got over the errors in construction but I am hopeful.

My next task is to insert a prop tube and drive is by an old servo motor. I mean really old when they were rather bigger than now and I used to remove the motors before disposing of the broken bits. I will let all know if the motor performs, when she gets in the water.

Finished my tea I will have a cold shower and try for sleep again.
regards
Roy
Liked by muddy and Steves-s and
#5734 73
With the Kelvin question it said it was about ship dynamics and apart from the spiral whatsits in the prop, only one answer mentioned a ship.
So you did not have to know the answer beforehand.
Roy
Liked by Steves-s and hermank
#5733 74
I think and have always thought that people look up the answers - even professional seaman don't get it right all the time so I don't think people that only just do models stand a chance of being consistently in the 100% bracket.
Having said that since the new board layout has been introduced the QoD questions have got considerable easier

Just my opinion
Liked by LewZ and SimpleSailor
#5731 73
Maybe some of the 100% happen to look up some of the answers?, or maybe they are just clever. I avoid looking anything up, which is why I am not 100%, and I am certainly not that clever.
Liked by LewZ and hermank
#5730 73
The number of people scoring 100% is creeping up - about time we had some harder questions !!
Liked by RossM
#5727 75
I was doing so well, then a sailing ship question gets me again.
I know nothing about these ships/boats. Whether they be big ones or small ones.
So I take a stab at a answer and get it wrong.
It's like the question master knows I am doing well then slips in a sailng question and tricks me.
Damm.
BOATSHED
Liked by SimpleSailor and hermank
#5726 76
No Pat, You are right. Look at the number of 100% correct answers now compared to a couple of months ago. There was only 2 or 3 100% correct then
Force nothing, waste nothing, leave nothing undone
Liked by hermank and SimpleSailor
#5722 74
Another repeat today, 11.6.26 🙄
BTW: Today is the ***th anniversary of the incident 😉
🥸
Young at heart 😉 Slightly older in other places.😊 Cheers Doug
Liked by Steves-s and hermank
#5721 75
Hi Stephen, I did some extra looking and found that I have to click on Private messages, on the left and that opens access and then works as you say.
Thanks for your reply.
Roy
Liked by hermank
#5720 76
@roycv you should be able to simply click on the messages that show unread, might need to scroll down to see unread older ones if you have quite a few private messages.

Stephen
We may not be able to control the wind 🍃 but we can always adjust our sails ⛵ - MBW Admin
Liked by hermank
#5719 76
Hi Steven I have 2 private messages but how do I open them? Also there are several messages with a single line and some dots. How do I look at the full message?
Roy
Liked by hermank
#5718 71
Thanks Steve, looks like Admin needs to restore my silver membership -then I'll be able!
Tony A.....
Liked by hermank
#5717 70
Hi Tony,

Just quickly, I see you should be Silver. Got a feeling I know what’s happened. Not your fault. Once I’m home later I’ll restore your membership. No need to do anything.

Thanks,
Stephen
We may not be able to control the wind 🍃 but we can always adjust our sails ⛵ - MBW Admin
Liked by hermank
#5716 69
Sorry Tony the silver member icon did not appear on your avatar on my laptop.
Truly humbled am I!
Roy
Liked by hermank
#5714 68
@TonyAsh I just tried by clicking previous at the top of question of the day and it works with no issues
On my avatar there is a bronze badge, there is nothing on yours so check your subscription status
Ed
Liked by hermank
#5713 67
I'm plenty coughed up! I'm a silver! In the past you could access past questions but not now it appears?
Tony A.....
Liked by hermank
#5710 65
Wharf.. Is actually an acronym WareHouse At River Frontage. An abbreviation used on maps to squeeze in a description.
It became an easy reference to the facility.
Roy
Liked by hermank
#5709 65
Der Besanmast heisst bei uns Kreuzmast!
Landratte Mike

We call the mizzenmast a cross mast!
See you soon, Landlubber Mike
if you don't ask, you won't get an answer!
Liked by hermank

Sign in to add to this thread.

Delete this post?

It will be removed from the site.

Discard this draft?

Your draft will be deleted and cannot be recovered.

You have an unfinished draft

What would you like to do with it?