Calling all 'river steamer' of the 1850's fans... please help.

Started by Avoca
32 replies 80 likes 0 followers Last activity: 14 days ago
#33 13
@tomarack

Love it, great paddle boat. Looks almost real.

And, why not honour it with the name of a police officer murdering, bank robbing, thieving, outlaw, bushranger's gang name.

It is the Australian way afterall...

Great job though.

Murray.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by tomarack and jumpugly
#32 13
Some time ago, I tried building an "Australian-style" live-steam
powered riverboat...
In the end, due to various circumstances, I gave up on live-steam models.
But I still absolutely love the steamboats from the Murray River!!!
While building the model, I asked an Australian friend of mine what a suitable name for it might be.
He replied, "How about Ned Kelly?"
I figured, why not?
And that is how my model, Ned Kelly, came to be...
I didn’t have any plans back then, just some reading material. Even so, I think the model turned out well—and it looked a bit like the real steamboat Alexander Arbuthnot...
https://www.rajce.idnes.cz/tomarack/album/ned-kelly
Main principle: if it is not broken - don't repair It!
Liked by jumpugly and Avoca
#31 17
@Avoca "True, but you'd have to find it first."
If I build it .......?
You'd have to find it😂
😎 😁
Young at heart 😉 Slightly older in other places.😊 Cheers Doug
Liked by jumpugly
#30 17
@RNinMunich

"...Thinks ... IF I fund the build surely it would be me 'letting' you live on it??..."

True, but you'd have to find it first.

PM to follow...
“...Mine's bigger than your's..." DJT - Cheers.
Liked by jumpugly
#29 17
@Avoca
Veery interestink! (As the little guy with the German helmet used ti say on 'Saturday Night Live)
Thinks ... IF I fund the build surely it would be me 'letting' you live on it??
Have you already made any projections of probable costs?
Any draft specifications of the full size you have in mind?
As you may have registered; I'm hooked - BUT not yet reeled in!
After 45 years trundling around the world I'm beginning to find Munich / Bayern a bit boring,
and the EU/German regulations constrictive and expensive.
If your post was more than a joke PM me!
'I'll cut you a deal'😉
Cheers, Doug😎
Young at heart 😉 Slightly older in other places.😊 Cheers Doug
Liked by jumpugly
#28 17
@RNinMunich

Haha.... infectious init!

I'll cut you a deal, you fund my full scale build, and I'll let you live on it over our Winters, for free.

Murray.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by jumpugly and RNinMunich
#27 17
@Avoca Re your post #24! 'A 50 footer!'??
You guys 'down there' have the advantage of lotsa SPACE to build stuff!
Where oh where in the middle of Munich am I gonna find the space to build anything bigger than a model?
BUT! If I could🤔Then... give up the apartment ... find an acre or so going cheap ...
Thinks .......!
😁😎
Young at heart 😉 Slightly older in other places.😊 Cheers Doug
Liked by jumpugly and Avoca
#25 18
Truth be told, that O Scale kit has just that certain beauty that would make a rewarding build. A full scale one is quite a dream. All I can say is...Aim High Murray!!!!!!
😀
Liked by chugalone100 and Avoca
#24 18
@jumpugly

Haha...

You think you have problems, having been born and raised 'on the Murray', I have always dreamed of retiring onto my own, small 'houseboat', and meandering my remaining days, cruising along the full-length of the old river.

Now I'm thinking, after I build this Tayleur model, I want to build a real "50 ft river steamer with a small cabin for the engineer.." and live on it!

Mmmm, now where's that bank manager's phone number...

Murray.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by chugalone100 and RNinMunich and
#23 18
Oh No! I have a River Steamer on the brain!!! Want to blow up that "O" Scale build! The urge has suddenly become overwhelming! HELP!!!!
😉
Liked by chugalone100 and Colin H and
#19 20
So, after lots of research and discussions, the most likely "50ft River Steamer, with small cabin for the engineer and his wife" listed as deck cargo on the Tayleur... was something like this.

And a suitable scale model version will be included on the poop deck of my finished Tayleur build.

Thanks all.
50ft River Steamer model.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by jumpugly and AlessandroSPQR
#18 21
@Avoca

Good question, but a very difficult one.
If you were the one coming up with the questions of the day instead of the AI, we wouldn't have such high percentages, hahahahahah.
Liked by chugalone100 and Avoca
#17 24
@chugalone100

What an awesome project, but yeah, a lot of intricate work to achieve the best result by the looks of it.

The man at Kitwood kindly sent me a copy of the instructions for my little river steamer model, which I have attached to help illustrate your point

Thanks for that,

Murray.
50 Ft River Steamer kit Instructions.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by jumpugly and AlessandroSPQR and
#16 24
@Avoca
Avoca, I totally agree with you! The precision of these models is superb, and there are some good build videos online to help with the assembly.

My personal favorite is the one I purchased, the *C.R. Lamb Sternwheeler*. What I can say about these kits is that they are beautifully designed, with an impressive level of detail and accuracy.

However, speaking from my own experience, don't let their beauty and quality fool you! Be prepared to do a lot of work with tweezers because many of the parts are absolutely tiny, especially on the sternwheeler.

I've opened the box several times to examine the parts and study the instructions, but I must confess that I still get a little intimidated by those miniature pieces! 😂

This is going to be a long build, and it will require plenty of patience and, most importantly, a very steady hand. But I have a feeling the finished model will be well worth the effort!
Liked by GaryLC and jumpugly and
#15 24
@ColRay

TBH Col, there are hundreds of the things still floating around.

But don't forget, the Murray River is ~2500 kms long, and takes in three States.

Then there's the Darling River, the Murrumbidgee River, the lakes of NSW, then the estuary systems around Sydney, etc. etc. etc...

So that's about 5,000 kms of just the Murray river bank one can tie up to. Plenty of room for them all.

Murray.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by AlessandroSPQR and chugalone100 and
#14 24
@tomarack

I was only able to find a reference to the 'Captain Sturt', a sternwheeler, which was/is(?) a full size paddle wheeler, not really a 50ft x 9ft River Steamer one could load onto the poop deck of a clipper, but still an interesting vessel.

Thanks agian.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by AlessandroSPQR
#12 24
@tomarack

Very interesting, thank you.

I hadn't considered the vessel was dismantled for transport.

I will check with my experts.

My expectation was, given the Tayleur's 98 ft x ~30 ft poop deck, it was just loaded as a full vessel and stored there.

Also, as there was no wreckage of the steamer recovered, the thought was it had simply 'launched' itself off the Tayleur as she went down.

And, I am very familiar with Echuca, Moama, Swan Hill, etc. etc. along the Murray's length, and there is a great deal of renewed interest in paddle boats by the tourism industry. But, these days, it is extremely commercialised and usually prohibitively expensive for local community members to enjoy.

FYI - a bit of local bias here. Mildura and surrounds is a low lying, flood plain, heavy clay based area, as per the previously attached wool barge photo. Whereas, Echuca, Moama, and Swan Hill are settled on river banks with steep cliff faces(as per attached,) far more difficult for loading/unloading boats, and not very child friendly for swimming. So, I don't really care for those locations.

Just a kid thing I guess.

Murray
Echuca Wharf.
Mildura Wharf.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by AlessandroSPQR and chugalone100
#11 24
@Avoca MHM...you are from Mildura..I have an old acquaintance there with whom I correspond—Frank Tucker, a former teacher who became a captain. Given what you say, it might be worth taking a look at the town of Echuca; for instance, the paddle steamers ps Adelaide and ps Alexander Arbuthnot are also very old.
Main principle: if it is not broken - don't repair It!
Liked by AlessandroSPQR
#10 24
@Avoca As I recall, the only sternwheeler on the Murray River was ss Sturt, built in the UK by John Laird ,Birkenhead in 1856 yr. , then dismantled, shipped to Australia, and reassembled there. It was involved in the construction of the weirs to make the river navigable....
Main principle: if it is not broken - don't repair It!
Liked by AlessandroSPQR and Avoca
#9 28
I think we may have a winner.

Its actually part of a series of models for 0 gauge railway enthusiasts, and its simply listed as a '50ft River Steamer', which is exactly what the Tayleur freight manifest states.

Its 1/48th scale, the same as my build, so, check.

And, its ideal for Australian river use, its a stern wheel paddle steamer, not side wheel, which I had discounted.

I'll wait for the experts to confer, but I think it might just do the trick.

Here is the link to their website, UK company and all...

https://kitwoodhillmodels.com/50ft-river-paddle-steamer/

Murray.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by AlessandroSPQR and Fishercat and
#8 34
FYI - genuine paddle STEAMER enthusiasts.

The Paddle Steamer Melbourne is, as far as I know, the only genuine 'steamer' still operating on the Murray River, probably Australia wide actually.

The balance of operational PS's on the Murray are diesel powered, so more Paddle Boat than Paddle Steamer, which kind of dulls the whole experience in my opinion.

When I was a younger person, my friends and I would swim out to the Melbourne, climb the paddle housing and dive back into the river just for the hell of it.

The tourists were amazed, the Melbourne's staff - bloody ropeable!
PS Melbourne.
PS Melbourne engine room.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by AlessandroSPQR and Colin H
#7 35
@tomarack

Thanks, but at a reported 9ft wide(x 50ft) I can't see the 'river steamer' on the Tayleur having paddles.

So, with the guidance of the Tayleur experts, I have decided to use a vessel similar to the attached.

I'll certainly visit the site you suggested though, sounds interesting.
(Update: Great site, just joined, thanks)

Murray.
Navy steam tender.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by AlessandroSPQR
#6 37
@Avoca Hi,try > https://www.paddleducks.co.uk/smf/index.php<
it is server for all "paddlewheel" modellers, with interesting matter about paddlewheelers.It’s essentially, first and foremost, an Australian affair. You’ll find all sorts of things there.
Wishing success!!
Main principle: if it is not broken - don't repair It!
Liked by Avoca and jumpugly
#5 38
This is the sort of thing I'm thinking of...

50 ft x 9 ft.
Ullster Steamer.
Africa Queen.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by AlessandroSPQR and jumpugly
#4 42
@jumpugly

Haha... I'm familiar with all the PSs you have listed, except for the Oscar W., and the model, of course.

Where I am from, Mildura, is pretty close to the middle of the navigable part of the Murray River, Australia's longest.

Due to inconsistent rainfall in inland Australia, a series of Locks and Weirs were created the length of the Murray, over time, to allow year-round trade, because there were very few roads at the time.

In fact, the early wool industry in Australia relied on paddle steamers, with their shallow draft and paddles, to get product to the export port of Adelaide and back to 'Blighty'.

The attached image is, in fact, of your Oscar W. towing a wool barge at the junction of the Murray and Darling Rivers, 30 ks from my hometown.

Also, of possible interest to you, as an American, with the consistent water level maintained by locks and weirs, a couple of crafty yanks arrived in Mildura, set-up a California type 'flood' irrigation system, with all steam driven pumping stations, and established a wine grape growing industry.

And, thanks to those crafty young fellows, the Chaffey Brothers, we have been kicking the butt of US wine ever since, and San Mateo Avenue is a major street in Mildura to this day.

So, thanks for that.

Oh, and we have also been kicking the butt of the UK wool industry ever since too.

So I guess a vote of thanks to the Colonial Govener of the day as well.

Murray.
Oscar W. and barge.
From Grantham's Iron Ships - PS Scarborough plan.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by tomarack and jumpugly and
#3 45
Murray!
Ooh! I like these Murray River Paddle wheeler steamers! Seems they come in all different shapes and sizes.
Should make for some fascinating work.
😉
Liked by tomarack and AlessandroSPQR and
#2 53
Update on the river steamer.

According to records just sent to me,

"... Starkey says the river steamboat was 50 feet long nine feet wide in its tiny cabin the engineer and his wife had their quarters..."

Thanks

Murray.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by tomarack and AlessandroSPQR and
#1 53

Calling all 'river steamer' of the 1850's fans... please help.

The build I'm working on, the 1850's 'Clipper' Tayleur was loaded with 'deck cargo' along with 600 odd passengers.

Among the cargo was a a boat listed as a 'river steamer'.

(Also, a large quantity of headstones, 2 railway carriages with a quantity of track, a prefabricated house and surgery).

I grew-up on the Murray River and when I see 'river steamer' I think of Paddle Steamers, but this, surely, is much more punt like I would think.

So, fellow modellers, I ask, what type/size of vessel would most likely be classed, on a freight bill, as a 'river steamer' in 1854?

Or, more imporatantly, does anyone know where I can get a 1/48th scale model of one, any one.

Thanks

Murray.
“...Mine's bigger than your's..." DJT - Cheers.
Liked by AlessandroSPQR and hermank

Sign in to add to this thread.

Delete this post?

It will be removed from the site.

Discard this draft?

Your draft will be deleted and cannot be recovered.

You have an unfinished draft

What would you like to do with it?