All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
January 2018: 20 people December 2017: 7 people November 2017: 13 people October 2017: 9 people September 2017: 15 people August 2017: 10 people July 2017: 16 people June 2017: 8 people May 2017: 2 people
Hi Cliff I used 1/8" diameter brass tube from B&Q. Made a jig and drilled each post with two holes to accept some brass chain I bought bt the metre from SHG supplies at one of the E. Port shows. Mine has sixteen either side and are 90mm from top to deck. I made a small shaped brass piece to cover the open top of the tube. I have seen others using flat strip of a similar size. If you use the lifeboat tag on your post you will find lots of posts, keep selecting "see more" and you will find pics of solent models. I am attaching pics of my model and hope this helps. If you are after a true scale version I suggest you look on the Mayhem site or the Lifeboats 24 site. If you or any other viewer find my answer helpful please feel free to tick the "like this post" box. Dave
Hi Cliff I believe it would have been 3:32 or possibly 7:64. The important point is to make sure you do not weaken the brass tube but also be sufficient to allow the chain to pass through. I suggest you buy some chain then use the smallest drill that allows the chain to pass through. I suggest you look at www.eileensemporium.com/ as they supply brass tube at reasonable prices and different thicknesses. I bought my chain from SHG http://www.shgmodels.com/. Download the catalogue and look at page 25. Good luck with the build Dave