All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
February 2017: 6 people January 2017: 37 people December 2016: 2 people November 2016: 2 people October 2016: 8 people September 2016: 4 people August 2016: 5 people July 2016: 4 people June 2016: 1 person May 2016: 1 person April 2016: 9 people March 2016: 5 people February 2016: 5 people
Hi guys need a little advice, I am finishing off a US Coast Guard Boat with twin props one left and one right handed, my question is if they are handed do the motors have to be wired up diferently i.e. One wired minus to plus and so on.
Simple answer is yes, you need to wire the motors so the props both rotate in the correct direction. I usually use a wetted finger behind (stern) the prop to feel the wash of air when rotating in the forward direction. if you can feel it from the front (bow) side it needs the wires swapping on that motor. I suggest you also check that the tx channel is set in the normal as against reverse setting before you start as some ESCs run slower in the reverse direction. Hope this helps and if you find my post helpful please tick the like box as it helps others find the post Dave