All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
October 2018: 5 people September 2018: 13 people August 2018: 5 people July 2018: 8 people June 2018: 8 people May 2018: 7 people April 2018: 24 people March 2018: 13 people February 2018: 8 people January 2018: 9 people
I make my own prop shafts. If you do use steel bar you will need to service the shaft frequently as it will rust inside the proptube. The real problem is the rust may damage the bearing when you remove it to clean.
If I can I use 316 marine grade stainless as it is more resistant to rust in salt environments. 303 grade will work but in my experience shows signs of rust over time, especially if your water is saline. I have used phosphor bronze but you do need to check the specs as suggested above. Some can be exceptionally hard and may cause wear to the shaft. Acetyl is very good but it comes in two variants and I have found Delrin to be more resilient and just as easy to machine. You can read details of the two types at https://www.directplastics.co.uk/about_plastics/why-choose-a...
We actually used a type of white Nylon on our six club model tugs which have been running since 2007 at shows where we give the public a chance to have a go. Some of the motors have required replacing but the bearings are as good today as when first installed.
Hi Ed, sorry 🤔 occurred to me later I should have posted the link! http://www.shgmodels.com/acatalog/ Download the catalogue and you'll find all the info. The other page links are useless, they only re-direct you again to the Download Catalogue.😲 Otherwise there is no useful product info on the website 🤔 Cheers Doug, Happy Tugging 😉
Young at heart - slightly older in other places 😉 Cheers Doug Grant me the Serenity to accept things I can't change, - the Courage to change things that I can, and the Wisdom to know the difference!
HI Ed, long time no speak. If you want up-graded prop shafts, have a look at Raboesch, they do shafts with roller bearings and great seals, look on their site , but , order from either Deans Marine, or Cornwall Model Boats, expensive but truly superb
Yes it's been a while! Had to keep the house. The wife wasn't feeling well! She's doing much better know!
I finally have a project I'm working on! It's the Brooklyn Tugboat by Dumas. I ordered the Prop and shaft by Dumas 3 weeks ago. Still waiting for it! When I saw Doug, RNinMunich talking about shafts that's when I asked about them! I could've ordered somewhere else! Hi Doug! Thanks for the URL's, I will bookmark them!