All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
December 2018: 5 people November 2018: 11 people October 2018: 9 people September 2018: 13 people August 2018: 5 people July 2018: 8 people June 2018: 8 people May 2018: 7 people April 2018: 24 people March 2018: 10 people
After the bad day at blackrock the fingers are like sausages and finding fiddley stuff difficult the wife offered to make some bits, so she chose the winch to start with "it can't be much harder than cross stitch "measured up and disappeared over the next few days would go to the shed to use the "drillie thing and other sawing things" her words not mine I did see the bread knife head towards the shed, see resulting photos,i think I may have created a monster ,looks like its the crochet hook or knitting pins for me now.was well impressed she did admit to raking through boxes for some bits
the puffer hull is slowly coming together now the daft questions I am going to use the tights and eze kote resin once I'm at that stage Q1.on the hull there are rubbing strips should these be fitted before or after the tights and resin? Q2 this is daft ,but is there a specific thickness of tights or is it just what's handy ?. Cheers Marky
Eveni' Marky, Re Tights! What's handy will surely depend on the Missus or ..? 😉 Frankly I would dispense with the tights altogether (the Missus may of course have a different opinion😁), more trouble than they are worth and don't contribute much or anything to the construction if the basis was soundly built. It only costs you more resin to fill in the mesh of the tights. If you must use tights then the higher the denier the better (at least 40 - 50) anything less will have a very open mesh and contribute virtually nothing to the hull strength, the Missus will explain denier to you This seems to me to be a 'hangover' from 50s style construction when glass fibre was more expensive relatively speaking. I tried it back then with a scratch built Sopwith Camel fuselage and it was a total disaster. Instead planking with 1/32 balsa and a thin resin coat worked a treat. Nowadays, 30 years or more, I use glass fibre tissue instead; density and therefore strength imparted to the hull is more even cos it don't stretch like tights! Whatever, have fun, and greetings to the Better Half (tights donator!) Cheers Doug 😎 PS: if you feel you need tights😲 (or FG tissue) fit the rubbing strakes after this, and after sanding the tights / tissue to shape. Otherwise the strakes will just get in the way and be a nuisance to sanding and will get damaged / deformed. PPS: shame about the amber nectar, my commiserations 🤔 My current tipple is more tawny port colour; a rather nice Lagavulin 😜
Young at heart - slightly older in other places 😉 Cheers Doug