All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
November 2018: 8 people October 2018: 9 people September 2018: 13 people August 2018: 5 people July 2018: 8 people June 2018: 8 people May 2018: 7 people April 2018: 24 people March 2018: 13 people February 2018: 5 people
I have a modav Huntsman 31, which heels over quite a lot on turns even after slowing down. I was looking at the chine spray rails at the rear of the boat (see picture) they do not dip below the outgoing angle of the hull as shown on the plan (see picture). Would a triangular fillet located under the existing chine strip to simulate the plan for a length along the hull from the transom improve the heeling over in turns?
Hi William, First; it looks like the rail was not fitted according to plan🤔 However; my Sea Scout has no rails at all (Yet!) and as you have seen in your other thread on this topic she runs fine with the same profile rudder. BUT; I notice that your rudder extends well below the prop. Mine only to about half way down the lower blade and she's very responsive with no sign of digging in. Before messing up a nice hull I would trim the rudder back to at least the lowest extremity of the prop. Do another sea trial and if she still digs in a bit lop a bit more off, to about half way down the lower prop blade. 😲 Easier to mess with the rudder than with the hull 😉 Cheers, Doug 😎
Attached Files - Click To View Large
Young at heart - slightly older in other places 😉 Cheers Doug Grant me the Serenity to accept things I can't change, - the Courage to change things that I can, and the Wisdom to know the difference!