Cookies used in this website are gluten free, wheat free and dairy free. By using this website you agree to our use of cookies. More Info
Guest
Login Below
Join Us On Social Media!
   
Get The Model Boats App!
Apple App Store
Android app on Google Play


Help Support This Website
£
or enter custom amount

(Non Contributor)

Help support this free
website and donate.



£285 a year is needed to keep the website and apps online. Please consider donating £5 or more to help towards these fees.
All donations are securely managed through PayPal. Amounts donated are not published online.

Many thanks for your kind support.

Model Boats Website Team


Donation History
September 2018: 10 people
August 2018: 5 people
July 2018: 8 people
June 2018: 8 people
May 2018: 7 people
April 2018: 24 people
March 2018: 13 people
February 2018: 8 people
January 2018: 17 people


Unique Visitors This Month

Website Members

Terms and Conditions
Privacy Policy
Advertising
Contact


Model Boats Website
Active Users (17)
Login or Register
To Remove This Ad

Login or Register
To Remove This Ad
>> Home > Forum > Boat Specific Chit Chat! > ELAINE, MOTOR CLEAN UP.
ELAINE, MOTOR CLEAN UP.
(85 views)
Author Message
Colin H.
(Fleet Admiral!)





Forum Posts: 365
8th Sep 2018 14:18  
>> Permalink
mdlbt.com/45962

Well here it is, 10.35mm bore with 16.19mm stroke. The flywheel is 41mm dia and 12.5mm thick weighing in at 117gms. As you can see from the pictures it was a pain to strip, but as I was desoldering the water jacket the head came loose, so I unscrewed it. Then carefully stripped the rest and cleaned each piece, finally returned to the water jacket, I had to remove the outer sleeve then cut the screws to remove the top and bottom discs. Next I removed all the crap that was stuck in the fins and cleaned the cylinder head jacket. Finally re-assembled. All that work and still don't have any idea of the maker. There is a number on one of the mounting webs 685, on the other side is a number 2. But the Web is broken. The flywheel has RMA stamped on it and a letter J above it. So mateys what's the verdict. And god alone knows if I am able to rebuild the water jacket.
Cheers Colin.


Attached Files - Click To View Large


Fair winds and calm waters,
COLIN.
Westquay
(Fleet Admiral!)





Forum Posts: 674
8th Sep 2018 21:58  
>> Permalink
mdlbt.com/45981

Hugely long stroke, Colin and I've never seen such a long piston. I am truly astonished that you got even a fart out of it, much less a run. I'm assuming it was built as a marine engine or would you say the finned barrel of an aero engine has been turned down to fit the water jacket?
A very large shouldered top to the crankcase. It really is a mystery.
I can only suggest home made.


Martin
Edited to say it's 1.36 cc., so a bit of a nipper.

Colin H.
(Fleet Admiral!)





Forum Posts: 365
8th Sep 2018 22:27  
>> Permalink
mdlbt.com/45982

The fins look like they haven't been touched, the home made water jacket is basically 2 brass washers with 4 screws clamping them tight to the alloy cylinder head, then a copper wrap around soldered on with 2 pipes soldered into the wrap. The fins were full of baked sludge, but luckily cleaned up with a fine needle and small swede brush. Cheers Colin.


Fair winds and calm waters,
COLIN.
Belton
(Apprentice)





Forum Posts: 2
9th Sep 2018 08:06  
>> Permalink
mdlbt.com/45990

It's a Mills 1.3. nice old engine.