All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
March 2018: 9 people February 2018: 8 people January 2018: 25 people December 2017: 7 people November 2017: 13 people October 2017: 9 people September 2017: 15 people August 2017: 10 people July 2017: 4 people
The stuffing box is packed with axle grease; the rudder is mounted awaiting control arm; motor mount is secured as is the motor. The motor had to be moved causing some redesigning issues ( for the purest) this could cause some questions, but I think with some planning the outcome will be respectable.
Hi Ron You seem to be progressing well. I doubt if the motor placement will cause a problem as there is plenty of room to place the battery aft to obtain the correct waterline. You may need to consider opening a hole in the middle former to allow the battery to fit at the optimum position. I suggest you do a quick test float to see where your battery needs to fit. If the wood is still untreated you could wrap the hull in cling film whilst testing Dave