All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
December 2017: 4 people November 2017: 13 people October 2017: 9 people September 2017: 15 people August 2017: 10 people July 2017: 16 people June 2017: 8 people May 2017: 8 people April 2017: 17 people
I have just acquired an old model which has a blue Ripmax ESC (as above). It has a small unit coming from it via 3 wires, with a red LED, an on/off switch and a press button marked s/c. It is water cooled. I have connected it up to a battery to see if any thing worked. I used a known working tx/rx. Nothing worked except the LED in the small unit flashes. Anyone got a manual or instructions for setting up the ESC? I may well get a new ESC but would like to check that the existing ESC is a worker or not.
Hi Soft start means you can push the stick full forward and the revs builds up at a steady pace, a lot of the ripmax esc don't have bec, as far as l can remember, l switched the tranny on, centre the trims, plugged the esc and 4.8v into the res, you should get a steady light, press the button, you should be ready to go, if not let me know and l'll see if l can find the data sheet. Dave