All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
May 2017: 6 people April 2017: 23 people March 2017: 9 people February 2017: 12 people January 2017: 37 people December 2016: 2 people November 2016: 2 people October 2016: 8 people September 2016: 1 person
I have just acquired an old model which has a blue Ripmax ESC (as above). It has a small unit coming from it via 3 wires, with a red LED, an on/off switch and a press button marked s/c. It is water cooled. I have connected it up to a battery to see if any thing worked. I used a known working tx/rx. Nothing worked except the LED in the small unit flashes. Anyone got a manual or instructions for setting up the ESC? I may well get a new ESC but would like to check that the existing ESC is a worker or not.
Hi Soft start means you can push the stick full forward and the revs builds up at a steady pace, a lot of the ripmax esc don't have bec, as far as l can remember, l switched the tranny on, centre the trims, plugged the esc and 4.8v into the res, you should get a steady light, press the button, you should be ready to go, if not let me know and l'll see if l can find the data sheet. Dave