All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
October 2018: 5 people September 2018: 13 people August 2018: 5 people July 2018: 8 people June 2018: 8 people May 2018: 7 people April 2018: 24 people March 2018: 13 people February 2018: 8 people January 2018: 9 people
hi -the hull only had these two motors and gearboxes in .I have greased the gearboxes cleaned the motors and soldered the wires on .The casings of the motors were rusty and have just been painted with a rust killer type paint..There is a bow thruster fitted with no motor but this locks up after about half a turn of the drive shaft -looks like I will need to replace this.I have bought 2 Chinese speed controllers with max current rating of 250amps ( waterproof type) I have used these before and seem ok but my experience is limited..The intention was to drive the motors separately on 2 channels
No worries mate, have the esc's got a max and min voltage??? they may not work at 6volts, if not then a set of 7.2v NimH packs will be brilliant x2 or possibly 4 packs with a Y lead for each pair, 3300mah packs are going for a good price on ebay at the moment, also have a look at component shop and hobbyking, be sure you are on the uk site to keep the postage down!!!! Wouldn't bother with lipo batteries, SLA or NimH are more user friendly. If you want the H/H superstructure try contacting Krick they now make the kit, took over from Robbe when the went bust. Are the propshafts ok??? withdraw the shafts and lightly oil them get the oil into the inner bearing as well.
NPJ The Happy Hunter was produced and sold by Robbe. They ceased trading some years ago as did Graupner so you may find it difficult to purchase and the additional fittings kits if sold sold separately may no longer be available. I have seen a model built professionally for a local supplier and the kit made a superb model. It is, in my opinion, more suitable for a builder with several models experience. It's good to hear you are so inspired to take on the next challenge but this may be a step too far at present. There is a buid post at http://shipmodelers.com/uploads/3/4/5/2/34520124/happyhunter...