All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
May 2017: 5 people April 2017: 23 people March 2017: 9 people February 2017: 12 people January 2017: 37 people December 2016: 2 people November 2016: 2 people October 2016: 8 people September 2016: 2 people
Hi Joe I was intrigued so did a search. Aimed at the plastic kit market I suspect, but looks well made and will certainly deliver just the right amount of glue for those intricate jobs. Be useful to hear if anyone has used and if it is suitable for other types of glue Dave
Hi Joe Did some more research and found a video on the Deluxe Site https://www.deluxematerials.co.uk/en/scale-plastics/15-pin-flow-applicator-5060243900456.html This really is a very fine nozzle dispenser and uses capillary action to deliver just the right amount of solvent to produce an invisible joint. They also recommend using for superglue accelerator by applying after the joint is closed to assist the setting process. Much neater way than brush or spray and will not result in marks on the surrounding area. For anyone building fine scale models a really good aid. Cheers Dave
Not quite the same thing but something useful When using say a Bottle of Aliphatic or P.V.A. or similar glue it can get abit messy with lack of control of the flow. Bang good sell small plastic dispenser bottles which you can decant you glue into from your bigger bottle.Makes things a lot neater. Very cheap too