All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
January 2018: 11 people December 2017: 7 people November 2017: 13 people October 2017: 9 people September 2017: 15 people August 2017: 10 people July 2017: 16 people June 2017: 8 people May 2017: 8 people April 2017: 3 people
Hi Nick, all sorts of goodies! But let's walk before we try to run 😉 One thing I would recommend is a Wattmeter for testing your motor / battery combinations so you know what current the motor will draw.
Re RX Battery: PLEASE do not forget to disconnect the red lead in the ESC plug for the RX otherwise you get a clash between the RX battery and the BEC circuit of the speed controller! Cheers Doug 😎
Young at heart - slightly older in other places 😉 cheers Doug
As basic as this sounds I got a switch that you plug into a channel on the rx to control lights or just about anything remotely.
I've also got a sound module with 2 speakers from eBay that you load the sound onto a microSD card which I find amusing, this also plugs into a rx channel.
Animatronics is new to me, I'm learning slowly, my 1/4 scale Donald Campbell should scare a few people.
I'm also dabbling with 3D printed linear actuators at the moment, I'm up to 130mm of travel from a normal servo.
Ohhh the entertainment 🤗