All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
February 2018: 4 people January 2018: 25 people December 2017: 7 people November 2017: 13 people October 2017: 9 people September 2017: 15 people August 2017: 10 people July 2017: 16 people June 2017: 1 person
NOW LOOSEN UP PLEASE:
I have this Joysway transmitter. It's for my Dragonflite 95. The controls on the left operate the rudder and the controls on the right operate the sails. I'm use to it being the opposite. Do I change the mode selector switch under the battery housing and THEN loosen and tighten the screws as per instructed. It just seems long winded.
Hi Les, unscrew the back and look at the gimbal mountings, there will be 2 or 4 screws on each gimbal, turn each gimbal through 90 degrees, refit the screws, switch the receiver plugs that should be it!!! Mark
Hi Les, yes use the mode buttons, it also mentions that the tension can be adjusted for each stick, you might want to try to slacken the (new) rudder stick and tighten the (new) sail stick, adjust slightly then re try to see how it feels. Don't overtighten as this will cause the sticks to either jam or snap off.