[Download]
Media Gallery
[Close]
| Donation History |
|
April 2018: 21 people March 2018: 13 people February 2018: 8 people January 2018: 25 people December 2017: 7 people November 2017: 13 people October 2017: 9 people September 2017: 4 people |
Unique Visitors This Month    |
Website Members   |
| Showing page 40 of 42 | Jump to page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 |
| Name: Emily P | Posted 17th Apr 2017 by GrahamP74 | Score: 5 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 24 inches Weight: 1500 grams |
|
|
||
| Scratch built from a wooden hull picked up on eBay for £35. Total spend on this project was £47. Based on an inshore stern trawler. | ||||
|
||||
| Name: Jaydee | Posted 16th Apr 2017 by IanD | Score: 9 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 34 inches Runtime: 10 Minutes |
NiMH (7.2v) |
|
Motor: Mtroniks 600 Type: Brushed Drive: Direct Drive |
Props: Single Propellor Type: 3 Blade |
| Built 1961. Raced in early '60s. Originally IC powered, now converted to electric. | ||||
|
||||
| Name: FALKE | Posted 6th Apr 2017 by Inkoust | Score: 8 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 29 inches Weight: 2200 grams Speed: 7 MPH Runtime: 80 Minutes |
LiPoly (7.4v) 4 Amp/h |
DSYS 15A Constant |
Motor: Dsys Type: Brushed Drive: Direct Drive |
Props: Single Propellor Type: 3 Blade Size: 30mm |
| Model fishing boat from ěského manufacturer VLADYKA models. ABS other wood hull. Engine 600. The whole structure on my site http://www.inkoust.estranky.cz/fotoalbum/falke--vladyka/ | ||||
|
||||
| Name: SYLT | Posted 6th Apr 2017 by Inkoust | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 47 inches Weight: 4300 grams Speed: 13 MPH Runtime: 90 Minutes |
LiPoly (7.4v) 5 Amp/h |
TURNIGY 25A Constant |
Motor: TURNIGY Type: Brushless Drive: Direct Drive |
Props: Twin Propellors Type: 4 Blade Size: 40mm |
| German Coast Guard boat. Built on the original hull construction, building ABS plastic, a ship length 120 cm. Cabin lighting, outdoor lighting, lowering anchor hoot. Střídavýmy drive motors Turnigy. Very good driving characteristics. Functional transverse drive. http://www.inkoust.estranky.cz/fotoalbum/sylt/ | ||||
|
||||
| Name: Sirius | Posted 1st Apr 2017 by HoweGY177 | Score: 5 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
|
|
|||
| No props, just paddles. Do not know the finished length - yet. Have sent a 'post' requesting help in obtaining plans. All I can add is watch this space for progress. | ||||
|
||||
| Name: Sprinkles | Posted 1st Apr 2017 by Commodore-H | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 32 inches |
NiMH (9.6v) |
mtronics |
Motor: electrofly 600 Type: Brushed Drive: Geared |
Props: Twin Propellors Type: 3 Blade Size: 35mm |
| Latest boat still under construction is Coast Guard PWB. There was a kit at one time but mine is scratch built. When finished it will feature working; running lights, searchlight and rotating beacon as well as operating water monitor and radar. | ||||
|
||||
| Name: Discovery II | Posted 31st Mar 2017 by NeilHodson | Score: 6 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 24 inches Weight: 1600 grams Speed: 5 MPH Runtime: 120 Minutes |
NiMH (6v) 1 Amp/h |
Chinese 10A Constant |
Motor: 380 Type: Brushed Drive: Direct Drive |
Props: Single Propellor Type: 3 Blade Size: 15mm |
| Purchased to sail when the wind is too strong for my J Class boats, this little plastic yacht has only one fault - The Cabin leaks if you don't tape it up - other than that it is a great little boat and lots of fun - how many yachts go as fast backwards as they do forwards? | ||||
|
||||
| Name: Exuberent DH 142 | Posted 29th Mar 2017 by Ballast | Score: 5 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 32 inches |
Lead Acid (6v) |
|
Motor: Graupner 700 Type: Brushed Drive: Direct Drive |
Props: Single Propellor Type: 3 Blade |
| She is a model of the original boat which was lost with skipper March 23rd 1983 off Portland. I had been building the static model since she was launched in March 1981 then ceased build when the tragedy took place and took my friend, the skipper. I recently moved to Burnham on Sea and joined Sedgemoor Model Boat Club and I was inspired to proceed with the build as an RC Model. Wish me luck !!!👍😊 The original boat was a Cygnus GM32. The hull and wheelhouse mouldings were supplied by Cygnus Marine Newlyn, Cornwall, as was the hull for the model. The boat was self built in Dartmouth by the owner/skipper as a Crab Potter. On completion she fished the waters off Dartmouth Devon during the summer months and then off Weymouth during the winter where she was subsequently lost en route for Dartmouth loaded with pots to transfer fishing activities back to home waters. She was a marvellous little sea boat and performed well in rough conditions. It is still a mystery until this day why she floundered. I hope her memory and the Skippers will live on through my model. | ||||
|
||||
| Name: Milkshake | Posted 29th Mar 2017 by Commodore-H | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 15 inches Weight: 500 grams Speed: 15 MPH |
NiCad (9.6v) |
mtronics |
Motor: robbe Type: Brushed Drive: Direct Drive |
Props: Single Propellor Type: 2 Blade S Type Size: 20mm |
| This little guy was built about 40 years ago. It is based on a ABS hull that was part of a Sterling kit made many years ago. I used the hull and just made up the rest. Originally it had a hedge clipper motor now it has a robbe motor and runs on 8 2/3 aa batteries. It is one of my favorites runners because it is little and really fast and maneuverable. Generally runs rings around other boats Currently it is on it third refit. | ||||
|
||||
| Name: DEFIANCE | Posted 29th Mar 2017 by Commodore-H | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 60 inches Speed: 5 MPH |
Lead Acid (12v) |
|
Motor: Mabuchi (surplus) Type: Brushed Drive: Belt |
Props: Twin Propellors Size: 45mm |
| This an Asheville class gunboat. Hull is fiberglass and was purchased. Everything else is scratch built. Operating features include radar, lights, smoke, rotating forward turrent and anchor | ||||
|
||||
| Name: Dr. Louise | Posted 28th Mar 2017 by Commodore-H | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 24 inches |
|
|
Motor: Outboard Type: IC Engine |
Props: Single Propellor Type: 2 Blade S Type |
| Purchased on eBay as a complete wreck. Totally done over and ready to go but haven't sailed it yet | ||||
|
||||
| Name: Dr. Louise | Posted 28th Mar 2017 by Commodore-H | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 45 inches Speed: 5 MPH |
Lead Acid (12v) |
Graupner |
Motor: Falcon Type: Brushed Drive: Direct Drive |
Props: Twin Propellors Size: 40mm |
| Was originally a kit but highly modified. Operating features include two operating radars, lights (mast head battle lights searchlights, running lights. Forward gun rotates and fires live black powder, barrel is spring mounted and recoiled. Sound effects, horns and battle station alarm. Exocet missile launcher fire bottle rockets. | ||||
|
||||
| Name: Dr. Louise | Posted 28th Mar 2017 by Commodore-H | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 31 inches Speed: 12 MPH |
NiCad (9.6v) |
Viper 5A Constant |
Motor: Robbe Type: Brushed Drive: Geared |
Props: Single Propellor Type: 3 Blade Size: 35mm |
| Scratch built admirals barge Wood hull. Simple model easy to transport and operate. At top speed much too fast, half of boat lifts out of the water surprising and fun | ||||
|
||||
| Name: Orca | Posted 28th Mar 2017 by Commodore-H | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 32 inches Speed: 3 MPH |
NiCad (9.6v) |
Viper 5A Constant |
Motor: Scratch built Type: Brushed Drive: Geared |
Props: Single Propellor Type: 3 Blade Size: 35mm |
| Scratch built Orca from movie "Jaws" Built from one 2 x 4! " We're gonna need a bugger boat" seeing my models people often ask if its a kit, and how much does it cost. Here I am holding the kit, one piece of wood, price $1.85 Here is the Orca in its carrying case. I found that this kind of carrier works well for me. It allows me to carry the boat in one hand leaving the other free to open doors, etc .It also makes it easy to put the boat down and pick it up again and protects it during transport. | ||||
|
||||
| Name: Ayton Cross | Posted 25th Mar 2017 by none | Score: 5 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 43 inches |
Lead Acid (12v) |
Component Shop |
Motor: Engel EPX 1236 Type: Brushed Drive: Direct Drive |
Props: Twin Propellors Type: 4 Blade Size: 65mm |
| A lot more information to add when it has ballast and pond tested. The motor mounts were home made and laminated into the hull they are removable so as to use the complete set up on another vessel. Bow thruster and korts and shaft fitted Not removable The electrical setup is as per the plan above. | ||||
|
||||
| Name: Imara | Posted 23rd Mar 2017 by johnp | Score: 8 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 46 inches Weight: 16000 grams Speed: 5 MPH Runtime: 90 Minutes |
Lead Acid (6v) 6 Amp/h |
Old Midway models |
Motor: 2x6 volt decaperms Type: Brushed Drive: Geared |
Props: Twin Propellors Type: 4 Blade Size: 45mm |
| Very heavy but great to sail, has an old steam engine sound system with whistle and mast nav and cabin lights | ||||
| Name: Rena | Posted 23rd Mar 2017 by dwkiap | Score: 5 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 54 inches Weight: 6400 grams Speed: 1 MPH |
NiCad (4.8v) 4 Amp/h |
none 15A Constant |
Type: Brushed Drive: Direct Drive |
Props: Single Propellor Type: 3 Blade Size: 45mm |
| Rena is a scale model of the John Alden ketch "Rena" She is mainly sail controlled but has a small auxiliary motor for those days with no wind. | ||||
| Name: 44 | Posted 23rd Mar 2017 by Inkoust | Score: 8 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 14 inches Weight: 500 grams Speed: 10 MPH Runtime: 65 Minutes |
LiPoly (7.4v) 2 Amp/h |
Turnigy 5A Constant |
Motor: Mabushi Type: Brushed Drive: Direct Drive |
Props: Triple Propellors Type: 3 Blade Size: 15mm |
| The construction of two engines of ABS, 180, Mabuchi. Controlled by the rudder back and forth, | ||||
|
||||
| Name: WPB 110 | Posted 23rd Mar 2017 by Inkoust | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 27 inches Weight: 1600 grams Speed: 11 MPH Runtime: 70 Minutes |
LiPoly (7.4v) 4 Amp/h |
TURNIGY 5A Constant |
Motor: TURNIGY Type: Brushless Drive: Direct Drive |
Props: Twin Propellors Type: 4 Blade Size: 25mm |
| Madonna has a laminate structure. 1:75 scale. Without brush engines fitted Turnigy two regulators and the same brand. Controlled by the rudder, back and forth, lighting, and lights. | ||||
|
||||
| Name: DIVA | Posted 23rd Mar 2017 by Inkoust | Score: 9 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 22 inches Weight: 800 grams Speed: 12 MPH Runtime: 30 Minutes |
LiPoly (7.4v) 4 Amp/h |
TURNIGY 20A Constant |
Motor: MIG 600 Type: Brushed Drive: Direct Drive |
Props: Single Propellor Type: 3 Blade Size: 30mm |
| Celo wooden cabin of RC model yachts from 60. . Function controlled by the engine and rudder. The kit is not. The hull of the several belts oplaňkováním plating.1:25 scale | ||||
|
||||
| Name: Streamlinia | Posted 21st Mar 2017 by ronrees | Score: 9 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 35 inches Weight: 3100 grams Speed: 12 MPH Runtime: 40 Minutes |
LiPoly (7.4v) 2 Amp/h |
Turnigy 5A Constant |
Motor: Turnigy 2820 Type: Brushless Drive: Direct Drive |
Props: Single Propellor Type: 2 Blade X Type Size: 35mm |
| Reduced size replica of Howes Basset Streamlinia from 1935. Fitted with a dummy boiler which produces water vapour, a rotating version of the original steam engine and built from Depron Foam. Plans availalable from Traplet and model was a two part article in Model Boats. Very pretty! | ||||
| Name: Rhonnda | Posted 21st Mar 2017 by ronrees | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 34 inches Speed: 6 MPH Runtime: 120 Minutes |
LiPoly (11.1v) 5 Amp/h |
Alex Engel Sub Commander 30 amp |
Motor: Turnigy 2830. Type: Brushless Drive: Belt |
Type: 3 Blade Size: 40mm |
| Own Design of 1909 Bristol Tug, Semi scale. Build using Foam and nylon stockings. Featured in Model Boats Mag March and April 2017. PlanFeature. | ||||
| Name: Marina | Posted 17th Mar 2017 by NeilHodson | Score: 8 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 42 inches Weight: 6000 grams Speed: 5 MPH Runtime: 60 Minutes |
Lead Acid (12v) 15 Amp/h |
Chinese |
Type: Brushed Drive: Geared |
Props: Single Propellor Type: 3 Blade Size: 70mm |
| Resurrected from a derelict hull and 'mahoganised', this boat is built on a bread and butter wooden hull coated in fibreglass. Boasting a Steam sound generator and baby oil smoke generator linked to the speed controller it had been mistaken for steam powered on several occasions. | ||||
|
||||
| Name: Gaffer | Posted 17th Mar 2017 by NeilHodson | Score: 8 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 40 inches Speed: 1 MPH Runtime: 120 Minutes |
NiCad (6v) 15 Amp/h |
Chinese 5A Constant |
Motor: Mtronics 400 Type: Brushed Drive: Direct Drive |
Props: Single Propellor Type: 3 Blade Size: 25mm |
| Built on an R36 hull to a home design based on a broads cruiser. Deck, superstructure and cabin interior finished in mahogany. Gaff rigged with treated cotton sails and fully working rigging, the mast folds at the tabernacle for transport and storage. two captive drum sail servos are mounted on removable trays either side of the mast and hidden behind a panel accessed from the cabin. Electronics are hidden inside a cupboard and the motor underneath a table. Rudder servo sits in another movable tray behind the seat in the drop cockpit. | ||||
|
||||
| Name: clyde puffer | Posted 16th Mar 2017 by jtdavid | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 15 inches Speed: 11 MPH |
Lead Acid (6v) 3 Amp/h |
import from hong kong |
Motor: mfa 380 7.2 v Type: Brushed Drive: Direct Drive |
Props: Single Propellor Type: 3 Blade Size: 25mm |
| this little boat is the best I have ever made. I now have 3 and started no 4. they are named after my grand children. they love to sail them as they are so manoverable they do any thing you want. any body wanting a simple build this is the one. I have built them all from off cuts of timber. the plan is from radio controlled modelboats 1985 | ||||
|
||||
| Name: ORP WICHER | Posted 15th Mar 2017 by Dainesh | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
|
|
|||
| She is my larger beauty :) Has not finished. She the lead ship of the Wicher class, was a Polish Navy destroyer. She saw combat in the Invasion of Poland, which began World War II in Europe. The destroyer was sunk by German bombers on 3 September 1939.[1] Flag ship of the Polish Navy. The ship was built at Ateliers et Chantiers Navals Français, Blainville-sur-Orne, near Caen. | ||||
|
||||
| Name: USSR GANGUTEZ | Posted 15th Mar 2017 by Dainesh | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
|
|
|||
| This is a small 80m long corvette from the Black Sea. It is not finished some bit and pieces are still missing but I try to finis ASAP. I would like to see her performance on the water. She is my little beauty :) | ||||
|
||||
| Name: FLORA | Posted 15th Mar 2017 by Dainesh | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
|
|
|||
| This is a nice little boat. Originally this is a boat for the Danube, but I built it in the UK, so it became a hybrid model because of the British flag 😁 | ||||
|
||||
| Name: KuK TB IV | Posted 15th Mar 2017 by Dainesh | Score: 10 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
|
|
|||
| Kaiserlich und Königlich (KuK) TB IV Recently built scale model boat (1:50). It is a fine art work. Length: 884mm Beam: 95mm One 3 blade propeller. Main armament: 2 45cm torpedo tubes, 2 4.7cm/L44 Skoda rapid firer. Crew: 20 people Speed:27.5 knots In 1905 the Austrian Naval Technical Committee presented three different designs for a 110t coastal torpedo-boat, mainly differing in the propulsion system (VTE or turbines). Having insufficient experience with turbines, a final VTE-propelled design with oil-firing was presented in 1907. To compare it with foreign technology, Krupp, Schichau and Yarrow were asked for competitive designs, all of which turned out to be inferior. Initially STT was ordered to build 8 such boats, but this was reduced to 6, because Danubius had to participate. When the older torpedo-boats lost their names in 1910 in favour of arable numbers, these units became in consequence Tb 1-Tb 6. The boats were surprisingly seaworthy up to sea state 5-6, and during the war they saw active service on escort, minesweeping and anti-submarine dunes. | ||||
|
||||
| Name: Bertha | Posted 15th Mar 2017 by solo1274 | Score: 8 | ||
| Specs | Power Source | Control | Drive | Thrust |
|
Length: 45 inches Weight: 2800 grams Speed: 2 MPH Runtime: 60 Minutes |
LiPoly (7.4v) 2 Amp/h |
|
||
| Scratch built from Marine Modeller plans. One sail drum servo for the main and self tacking jib. A sail arm servo for the staysail and foresail. An extra servo to allow tension on the upper trisail. The bowsprit is an additional 10" on the overall length of the model. For RC sailing I have a 2.5kg detachable keel and rudder extesion ( shown in the photograph). All the deck winches are built from old clock parts. The lee boards are also functional and work in conjunction with the forward head sails and the sailarm servo. For transportation the top mast can be lowered and the bowsprit raised. | ||||
|
||||
| Showing page 40 of 42 | Jump to page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 |
