All donations are securely managed through PayPal. Amounts donated are not published online.
Many thanks for your kind support.
Model Boats Website Team
November 2018: 9 people October 2018: 9 people September 2018: 13 people August 2018: 5 people July 2018: 8 people June 2018: 8 people May 2018: 7 people April 2018: 24 people March 2018: 13 people February 2018: 4 people
Hi Will, Sounds good to me👍 I like the Action Electroncs stuff as well, have their dual ESC with rudder mixer which I want to try in my long thin destroyer to reduce the turning radius. Was misled about the SLA by a previous post🤔 Makes sense re the BEC which I believe is 5V 1.2A. I prefer a separate RX batt anyway😉 BUT: if you run a 6V NiMh down to 5.6V you are close to the Deep Discharge zone which will seriously damage the battery and drastically shorten it's life 😲 Threshold voltage is 1.0V per cell, so take erratic control as a warning that the battery is flat and come home soon! Look forward to your Sea Trials report. Cheers, Doug
Your answer even quicker 😲 OK, if you don't want to practice twin motor control using two sticks, like tank driver, then I suggest the Action Electronics mixer board (as discussed during your aborted tug conversion🤔). You'll probably need the 20A version with those motors. Cheers, Doug 😎
Hi Chris, glad to have helped, having already been down that road and learning the hard way! 😉 Actually Raboesch is a Dutch company. Not quite Double Dutch but in the case of 'Left - Right' props close to 🤔 Your boat: Rother class, OK so it's a slow (10knots) displacement hull. With bilge keels which make turning more difficult. I would probably use two brushed motors cos you don't need the Oomph of brushless. With brushed you can then use the Action Electronics Dual ESC and rudder mixer, P94Lite. From Component Shop. See pic. https://www.componentshop.co.uk/action-electronics/esc.html Good for 10A continuous to each motor - brushed ONLY! I'm about to fit one to my 5 foot Graf Spee. With the hull form of the Rother only sea trials will confirm which is best outward or inward. have fun with the build and trials, looking forward to updates / pics / vids 👍 BTW: will yours also be Self Righting??? 😉 Cheers Doug 😎
Hi, as I wrote,I have no experience with Action Electronics products. Regarding the use of internal mixers in HKT6A , these did not suit for this case,neither Turnigy TGY9X.There is always one main signal as control and the other one(or more) as a signal dependent. I needed to mix two independent signals and that is why I chose an external simple mixer! To Dave M .. excuse me -I have no experience with brushless motors but in this case I do not know why it could not work. It is a mix of two control signals only ...What's the problem with that, if I use brushless motors?
Have been considering this for my Southampton. Don't want tank steering though, since I sail in a Biergarten I need to keep one hand free for the Bierkrug!😉 So I decided to try the Action Electronics P94 dual ESC and rudder mixer all in one module! From Component Shop these days. Can be easily set in one of 4 modes. See pic. NOTE: Brushed motors ONLY!! Not fitted yet, still busy with Sea Scout and PT Boat. The module may yet end up in my Destroyer! Cheers Doug 😎