Registered
7th Dec 2014

Last Online
21st Feb 2019

camyaj

Recent Posts

Jet Drive by camyaj Sub-Lieutenant   Posted: 3 days ago ✓ Like This Post   ( 1 )

Maybe ? https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=m570.l13...

jet drive

Bismark by camyaj Sub-Lieutenant   Posted: 10 days ago ✓ Like This Post   ( 1 )

And only £8.99 each for the remaining 138 issues

bismark

Landing Ship Tanks (WW2) by camyaj Sub-Lieutenant   Posted: 4 months ago ✓ Like This Post   ( 1 )

Went to Tobruk from Toulon on one and returned during mid 60's run by merchant navy and a lot of chinese depending which engineer was on we got to swim in the bow section. Not if the scots engineer was on as he had the hump due he got nowhere with his ''see you jimmy '' as we were all either Scots Greys or Black Watch. No tanks just soft skins and armoured cars plus our 2 choppers. Also used in Aden but that was a short trip up the coast that was everything and Carriers big flag waving exercise

chines engine ship chine bow

Range Safety Launch? by camyaj Sub-Lieutenant   Posted: 6 months ago ✓ Like This Post   ( 1 )

sorry about the two parter

Range Safety Launch? by camyaj Sub-Lieutenant   Posted: 6 months ago ✓ Like This Post   ( 1 )

you could try this worked on my Colin Archer prop shaft entry which I could not get at intrnally www.ebay.co.uk/p/Captain-Tolleys-Creeping-Crack-Cure-Sealant-60ml/1805173504?iid=171234457522&chn=p

prop e bay prop shaft

Range Safety Launch? by camyaj Sub-Lieutenant   Posted: 6 months ago ✓ Like This Post   ( 1 )

I tried this on a Colin Archer leaking round the propshaft entry no internal access it worked its like watered down milk best on levellish surface pour

prop propshaft prop shaft

PT 109 upgrade? by camyaj Sub-Lieutenant   Posted: 6 months ago ✓ Like This Post   ( 0 )

My 1/24th Schnellboot 5' was running on 3x850 mfa motors changed to 1 x Turnigy 3648 1450kv outrunner operating on a 3s lipo. . more than enough speed even with the outer props just freewheeling

motor prop turnigy lipo schnellboot outrunner mfa

South West Ship Show by camyaj Sub-Lieutenant   Posted: 11 months ago ✓ Like This Post   ( 0 )

I was not rubbishing it just personal dislike of going into Bristol unless I have to. I used to live about 1/2 mile along that road from the venue nowt wrong with the area itself.

ship show

South West Ship Show by camyaj Sub-Lieutenant   Posted: 11 months ago ✓ Like This Post   ( 0 )

its in Bristol

ship show

South West Ship Show by camyaj Sub-Lieutenant   Posted: 11 months ago ✓ Like This Post   ( 0 )

Southmead Road No Thanks

ship show

1-35 scale S100 schennllboot by camyaj Sub-Lieutenant   Posted: 11 months ago ✓ Like This Post   ( 2 )

Details/Link for the lathe please Thanks

lathe

Hms Rodney/ Nelson by camyaj Sub-Lieutenant   Posted: 11 months ago ✓ Like This Post   ( 0 )

Hi appreciate wrong ship but in your area I have The Bismarck

ship hms nelson

Model Boats Dec 2007 by camyaj Sub-Lieutenant   Posted: 1 year ago ✓ Like This Post   ( 0 )

I might have that somewhere in the pile if you don't get sorted if so I will scan and mail

model boats model

3 blades v 2 blades on air boat by camyaj Sub-Lieutenant   Posted: 1 year ago ✓ Like This Post   ( 1 )

Dedicated section http://www.rcuniverse.com/forum/rc-airboats-246/

air boat

MFA Torpedo 850 motor by camyaj Sub-Lieutenant   Posted: 2 years ago ✓ Like This Post   ( 1 )

Silly Me😋

motor torpedo motor torpedo 850 mfa torpedo 850 motor

MFA Torpedo 850 motor by camyaj Sub-Lieutenant   Posted: 2 years ago ✓ Like This Post   ( 1 )

Don't forget these motors weigh just under 2Lb each

motor torpedo motor torpedo 850 mfa torpedo 850 motor

Wanted large rc warship by camyaj Sub-Lieutenant   Posted: 2 years ago ✓ Like This Post   ( 0 )

Hi if you are still looking I have the Graupner Bismarck rtr PM sent

graupner ship wanted

MFA Torpedo 850 motor by camyaj Sub-Lieutenant   Posted: 2 years ago ✓ Like This Post   ( 1 )

Which part of I run 3 MFA x 850's on these don't you understand😊

motor torpedo motor torpedo 850 mfa torpedo 850 motor

MFA Torpedo 850 motor by camyaj Sub-Lieutenant   Posted: 2 years ago ✓ Like This Post   ( 0 )

Are you highlighting the link and then right clicvking and getting google to find it as it seems on this site you just cant click on it like you should be able to Munich you might also salvage the Disc drive motors they should be small Brushless ones

motor lighting brush brushless torpedo motor torpedo 850 mfa torpedo 850 motor

MFA Torpedo 850 motor by camyaj Sub-Lieutenant   Posted: 2 years ago ✓ Like This Post   ( 0 )

I use these http://www.ebay.co.uk/itm/122489724489?ul_noapp=true in my S-Boot and PT boat both driving 3x motors ie MFA 850's and Graupner 600's those Blue or pink ones I had trouble with as with Not electronize but the other ones.They are car ones and you could probably get similar ones in the UK . They may be chinese amps but they handle 40amps plus no bother

chines graupner motor pt boat chine torpedo motor torpedo 850 mfa electronize torpedo 850 motor

Submarine wanted by camyaj Sub-Lieutenant   Posted: 2 years ago ✓ Like This Post   ( 0 )

Thanks but I need one ready to sail

sub sail submarine wanted

Submarine wanted by camyaj Sub-Lieutenant   Posted: 2 years ago ✓ Like This Post   ( 1 )

After a Sub static dive WW2 or modern reasonable distance to Bristol

sub ww2 submarine wanted

SOUTH WEST SHIP SHOW by camyaj Sub-Lieutenant   Posted: 2 years ago ✓ Like This Post   ( 0 )

That should be good news Parkingwise

ship show

South West Ship Show by camyaj Sub-Lieutenant   Posted: 3 years ago ✓ Like This Post   ( 2 )

AS said or there is waitrose and lidls carpark Virtually just across the road and whilst you are visiting you are only 5 mins from the lake grounds and Battry point which has a memorial to the merchnt seamnn

lake ship show

WESTBOURNE MODEL CO. by camyaj Sub-Lieutenant   Posted: 3 years ago ✓ Like This Post   ( 0 )

Have a look on Mayhems site you can kiss your order goodbye amd they already have the bad name

model westbourne

Caldercraft 'Imara' Ready built RC Tug for sale by camyaj Sub-Lieutenant   Posted: 3 years ago ✓ Like This Post   ( 0 )

Steve I sent him a pm a few days ago had no response yet

for sale tug built caldercraft

Robbe DÃA?sseldorf by camyaj Sub-Lieutenant   Posted: 4 years ago ✓ Like This Post   ( 0 )

I sent you a PM as hotmail no likee your address Note I sent 2 as I goofed with mine 😁

robbe

Robbe DÃA?sseldorf by camyaj Sub-Lieutenant   Posted: 4 years ago ✓ Like This Post   ( 0 )

On Its way Check your mail

robbe

Robbe DÃA?sseldorf by camyaj Sub-Lieutenant   Posted: 4 years ago ✓ Like This Post   ( 0 )

You're welcome will get it off tomorrow

robbe

Robbe DÃA?sseldorf by camyaj Sub-Lieutenant   Posted: 4 years ago ✓ Like This Post   ( 0 )

I have the Dusseldorf alas no instructions I could trace the stand outline if that would be suitable. the hull sections will fit on an A4 sheet so it would be full size.If you PM me I will do this W/end and send as PDF

hull instructions robbe pdf