This boat was recently purchased on-line from the grandson of the 1:1 boat in the photos. He built the boat from old photos and his memory. This is truly a "pond yacht" as the is no access to below deck for any radio control equipment. The plan is to keep the boat as shown but to up up grade the deck hardware and aft deck details. It is powered by a small electric motor running on one "C" cell battery. Since the first posting testing has shown the single "C" cell didn't have enough power to turn the prop while in the water. Experiments with other batteries has shown a combination of two 3.7v Li-po batteries in parallel should give up to one hour run time. in the interim I've added a few more photos of the update to the trim. You'll notice the companionway now has a door and hatchway. Unfortunately it blocks the view of the detailed interior the builder made. There are some additional items that have been added since these photos were taken including more detail to the control panel and a steaming light and stern light. I'm undecided about adding a small boat to the cabin top as a lifeboat/dingy. Time will tell...