PT 109 was one of the hundreds of motor torpedo boats (PT) of the PT 103 class completed between 1942 and 1945 by Elco Naval Division of Electric Boat Company at Bayonne, New Jersey. The Elco boats were the largest in size of the three types of PT boats built for U.S. use during World War II. Wooden-hulled, 80 feet long with a 20-foot, 8-inch beam, the Elco PT boats had three 12-cylinder Packard gasoline engines generating a total of 4,500 horsepower for a designed speed of 41 knots. With accommodations for 3 officers and 14 men, the crew varied from 12 to 14. its full-load displacement was 56 tons. Early Elco boats had two 20mm guns, four .50-caliber machine guns, and two or four 21-inch torpedo tubes. Some of them carried depth charges or mine racks. Later boats mounted one 40mm gun and four torpedo launching racks. Many boats received ad-hoc refits at advanced bases, mounting such light guns as Army Air Forces 37mm aircraft guns and even Japanese 23mm guns. Some PTs later received rocket launchers.

This Proboat PT 109 model was brought in 2013 for £100 these boats are rare now, This one had a few faults with the propshafts they were bent and noisy both were replaced, with quality 4mm shafts, motors twin 600s were also replaced by Graupner versions along with mounts and couplings, basically all the running gear, also two ESCs by Aquapower were added and a 2.4G RC system.

This is a 40" long model of a gas powered Berkley Company kit of a US Air Force crash boat from 1955. The plank on frame kit was in production for about 10 years and was meant to be powered by a model airplane gas motor with a single shaft. it depicts an experimental 50 knot rescue boat (painted in a peace time color scheme) during service with the USAF. if successfull it would have been put into production designed to be a replacement rescue craft for all Air Force 65' crash boats. Unfortunately for the crash boat program the Air Force lost interest as helicopters were become a reliable way of rescueing downed pilots along the coast. The prototype and a sister boat were scrapped, as was the entire program.
The model was given to me to be restored(top picture) for the son of a retired USAF veteran that was a crash boat crewman. The model was built in 1957 and had been run a few times on a tether line, R/C was pretty expensive back in the day. I stripped the hull, filled in all the cracks and rebuilt the mast. I added a small boat, davit, liferaft, coxswain station, spray shield and deck hardware among other things. Actually all the owner wanted was a paint job, he was very happy with it's new appearencep! Although I fiberglassed the wooden hull and made it watertight, the owner doesn't plan to run it, just a memorial to his dad's service. I really enjoyed working on this "rare bird".