Gemini G10 Catamaran fishing boat

Started by GrahamP74

7 updates 31 likes 26 comments
GrahamP74 Opening post

Gemini G10 Catamaran fishing boat

My next project has been a request from a local fisherman who after seeing my other models has asked me to make one of his. My father put the engines in the boat when it was first built. Julie Jean works from the beach at Dungeness. I am going to make the hulls from scratch as I can not find a catamaran hull with the right hull shape. This will be made from board and then coated in glass and resin. Scale will be metric 5cm - 1 m so total length will be 50cm..some photos here of the boat
Liked by Inkoust and MouldBuilder and
11 comments
  1. GrahamP74
    Sub-Lieutenant
    Well I have started tracking the plans down and have managed to find the yard that now has the rights to the plans. Hopefully after the bank holiday they will contact me..
    Liked by Martin555 and RNinMunich

Sign in to comment on this update.

Measurements at Sea!

I spent a day at sea to understand the gear and get lots of measurements. The boat is fishing for whelks currently and after hauling and shooting 200 pots we had just under 500 kilos!
Liked by Inkoust and Rookysailor and
7 comments
  1. RookysailorSilver
    Rear Admiral
    Hi Graham, have you got plans for this boat? I believe
    Models by Design have a twin hull craft very similar to this, might be worth a look😮

    Peter (Rooky)
    Liked by Martin555
  2. GrahamP74
    Sub-Lieutenant
    Hi you are right they do have a model but it is not the same... I have tracked the plans down and am waiting for the drawings to be sent.
    Liked by Martin555

Sign in to comment on this update.

Plug ready!

Three fills and sands later and the plug is glued to the board and has had a coat to resin to seal it. Now to try and get a mould!!
Liked by Joe727 and MouldBuilder and
1 comment
  1. Martin555
    Fleet Admiral
    Well this is the bit that will determine the quality of the finished model.
    Good luck.

    Martin555.

Sign in to comment on this update.

Mould out of the plug!

Really happy that the mould released from the plug! Now to make the hull!
Liked by MouldBuilder and marky and
4 comments
  1. GrahamP74
    Sub-Lieutenant
    Not sure about mass! Would be happy with one, two would be brilliant as I have someone who wants me to make a copy of their boat and three plus would be a bonus!
    Liked by marky and Martin555

Sign in to comment on this update.

Out of the mould and full steam ahead!

Hull is now out of the mould and the deck has been fitted but not fixed as I am waiting for motors to arrive. Wheelhouse and gantry are underway!
Liked by MouldBuilder and Martin555 and

Sign in to comment on this update.

Update

Missed a few updates as I have been completing a new project.
So here’s the final model, more detail to follow but for now it’s on the back burner!
A Lochin 33 is currently on the bench being completed for a man in Cornwall
Liked by jbkiwi and Joe727 and
1 comment

Sign in to comment on this update.

Delete this post?

It will be removed from the site.

Discard this draft?

Your draft will be deleted and cannot be recovered.

You have an unfinished draft

What would you like to do with it?