Neil - I am alos restoring on old 34" Crash Tender and am at point of re-engining -could you detail which motor you have gone with and what kind of performance you get from it?
Ideally I wouold appreciate your set up details re motor/battery/esc and prop dia and no. blades. Also clearance of prop to rudder balde and prop tip to hull.....
Appreciating any advice for improving over what you have done...
Peter Dent

Hi Jarvo
If you search with just 017000594-0 it does come show but only 19mm by 16mm hole spacing. There is another mount in the item like section but this looks to be small hole spacing as well.

Cheers Neil

Hi Dave, thanks for the info, still cant find the larger one, this one seems a bit small. Keep on looking!!!!
Regards

Mark

Hi Mark
Try
Aluminium Engine Mount
SKU:
017000594-0
on the Hobby King site
https://hobbyking.com/en_us/catalogsearch/result/index/?erp_category=&p=5&q=motor+mount

You might need to find the bigger one Neil found
Dave

Hi Neil, thanks for the quick reply. have looked on Hobby King, cant find it, have you got the code number and or the proper description please?
Mark

Hi Jarvo,
Thanks for confirmation on mount was a little unsure as it all looks a little small compared against brush motor mounts.

The mount was from hobby king and was only £3.50 but then postage on top luckily made it worth my while with purchase of a new setup 😁

Hi Neil, that mount will be perfect. Just a thought, where did you get it? could do with a couple of them actually.
Mark