Search
454 posts for “tug” · in Blogs
Page 7 of 17
Blog
Wyeforce 2 Tug
Lower front superstructure and Wheelhouse made but still need finishing as does the hull. the Korts props and motors are all that's been done in the hull but they do all work. see you next month
Blog
Wyeforce 2 Tug
And now the begging with no end in sight. The hull is bigger than the wyeforce in length and around the skirt but will build it from wyeforce plans so I called it 2
Blog
1:30 scale tug boat
Was at the wood show again today managed to finish hull . I answered a lot of question today so progress was slow .
Blog
Hobby Engine 'Richardson' Tug Upgrade
So following a long away week-end of Astronomy, now trying to get a bit further before going away for a couple of days. As I start to wire up the power circuit I realise how important it is to think things through first! Made up the link fr …
Blog
Sanson Tugboat
Just started my first timber model boat, will be converting it to radio controlled. Still waiting for some electronics, to turn up, motor, ESC, battery, then it will get serious. still have to source propeller and shaft when I find out moto …
Blog
Director class tug
Video of the finished feathering wheels in action can be seen at: https://www.youtube.com/watch?v=zngYUNvRnQo. Roy
Blog
Some sort of tugboat /cargo thingy
Well I have yet another old hull in the shed I have decided I will have to do something with. So Thinking maybe some sort of cargo ship. Or what ever it finally turns out to be... This time with all the superstructure at the stern.. The hul …
Blog
Push-tug San Pedro
I have found a piece of plastic that came from the transom! it's the right size for the stern area which I believe is leaking! The seam looks as if it's separating, so maybe I'll reinforce the seam! As you can see from the picture on the ri …
Blog
Tugboat Serenity (AKA) Jersey City
I was looking at my new crew, I just noticed that one of my crew members is a different scale. it's at 1:50 instead of 1:32 it's not to bad of a difference. I'm just glad its the figure I inadvertently put as the captain! the only way you c …
Blog
Tugboat Serenity
Introducing my crew of gnomes, I found these at the local Dollar store! I should of bought three packs instead of one. at least Serenity has some kind of crew!
Blog
Tugboat Serenity
Not the neatest looking engine room but, I do know where everything is! Serenity is powered by separate batteries. two lead acid 6.0 volt 2.5 amp 9 volt 3.0 volts X 2 one power pack 1.5X8=12 volts. she has quite a bit of weight also a lot o …
Blog
Tugboat Serenity
Her Fantail is made up of plastic and wood! I decided to just glue 1/6" X 1/8" spruce. if you look at the stern shot you can see how snug a fit there is! do you see the escape hatch!
Blog
Tugboat Serenity
OK, I'm going to take Serenity for her maiden voyage in about an hour or so. I'll be doing a video to document the voyage hopefully everything goes well!
Blog
Tugboat Serenity
I just wanted to show my tow hook, its embedded in to the main cabin. I decided to do this when I noticed that the aft H bitt wasn't strong enough to handle towing. the H bitt can how ever handle on the hip towing!
Blog
Tugboat Serenity
I made her Bow fender out of a jar gripper folded in half , because I didn't want to spend a bunch of time making a bow fender! maybe in the future I'll make one up. see the way I have her tied off the H bitt.
Blog
Tugboat Serenity
She has a steam smoke stack but I have a diesel sound generator in her I thought why not have her modern sounding! if you look forward of the smoke stack you can see a small area. where I'm going to put some port holes looking through into …
Blog
Tugboat Serenity
oh, though this is her starboard side. I just wanted to point out the lines I drew, to be used for her rub rails.
Blog
Tugboat Serenity
Her main deck is two pieces, so you can see the green tape I used to hold the main deck together! for gluing this is accomplished by running a bead of thick CA on the under part of the deck, the deck must be upside down on your work bench f …
Blog
Tugboat Serenity
If you look at her Smoke Stack you'll see her logo is too high up the stack, I wasn't sure if I was going to use the logo that came with the Kit! About her Dingy, it comes as two pieces of molded abs. which I then cut out and tied criss X c …
Blog
Tugboat Serenity
Topside features include a hand made working radar and spot light which were an after thought! I would have liked to make the water canon work but, I ran out of room in the engine room, where would I have put the pump! Oh, in the third pict …
Blog
Tugboat Serenity
Her mast is suppose to be 12" (305mm) but I made it 10" (205mm) to conserve mast height. I figured that when I make her transport box the extra 2" (51mm) is more wood I need. and who would really notice except another Jersey City model buil …
Blog
Tugboat Serenity
Her original plans have her Mast going through the deck in the main cabin, I decided to put her mast aft of the main cabin as I thought this would make for a stronger hold and change her design. You can clearly see the Bondo I used to seal …
Blog
Tugboat Serenity
As you can see I've placed the Rudder, after the resin has dried over night. I couldn't solder the Rudder post to the Rudder, so I drilled a 1/8" hole through the Rudder and Post. and used a piece of copper wire and hammered it all together …
Blog
Tugboat Serenity
Stern looking down, this is where the Rudder block and post will go! Be careful not to glue the post to the Block or the Rudder.
Blog
Tugboat Serenity
If you look where the Pink and Black pieces where on the cabin aft, you'll see the Mushroom Vent I made up!
Blog
Tugboat Serenity
I cut the original Vent stacks that where in the back of the cabin located where you see the pink and black pieces. I made my own mushroom vents which were made of plastic and wood.
Blog
Tugboat Serenity
I replaced the original Stem post with a bitt I made myself out of aluminum wire. It's embedded about 5/8" into the cap-rail and bulwark. It makes for a strong tow astern! also I reinforced the Bow using 3/8" pieces of plastic.
Blog
Tugboat Serenity
I've glued the Hull together and have also used Bondo to the Keel, having done that I also sanded it. Make sure the keel is sanded and leave a little grit on the surface for the primer and paint to stick to!