Search
464 posts for “steam” · in Forum
Page 1 of 17
Forum
Re: North Sea Drifters and Steam Engines.
… ove the last one there is nothing that beats a full head of steam in all its glory. There is nothing that compares to the pure enjoyment of steam power. Expensive, yes I suppose it is but worth every penny, as it's an investment and it will …
Forum
North Sea Drifters and Steam Engines.
… a doubt the biggest challenge ever was fitting a boiler and steam engine into a Clyde Puffer as everything needs to go at the extreme back end. Mind it can be done with a lot of thought, sprockets chains and lay shafts, not forgetting the b …
Forum
Re: North Sea Drifters and Steam Engines.
… hey tend to photo better on a cold day when you can see the steam exhaust. Your ceramic fibre paper insulation gasket is available also on Amazon, just thought I would mention that in passing. Saito make some really nicely engineered steam …
Forum
Re: North Sea Drifters and Steam Engines.
@GaryLC This is the Saito Hercules steam tug. It has a fiberglass hull, with wood superstructure and deck. It has a twin cylinder Saito vertical engine, with a horizontal boiler - very similar to your powerplant. It runs on denatured alcoho …
Forum
Re: TVR1A Steam Engine.
… m the gas cut off to the attenuator. 4 dots on the pipe run steam pressure from boiler to attenuator. 5 dots on the pipe run from attenuator to boiler gas burner. Hope fully this is less confusing than the first effort. Regards, Gary.
Forum
TVR1A Steam Engine.
… s on the building front, of what eventually will be an open steam launch. If anyone out there in the ether is struggling with the problem of fitting the forward and reverse servo. This set up works really well, mind it did take a little whi …
Forum
Re: TVR1A Steam Engine.
Hi Algon, it is always good to hear from a fellow steam enthusiast, as we are some what thin on the ground. please post some photos of your progress as I am very interested in your project. As I don't have any drawings as such, I have opted …
Forum
TVR1A Steam Engine.
For ChrisF, I have found that to date motor cycles and steam powered boats go together rather well, in the fact that a good understanding of the mechanical side of things works rather well for both. If you are a bike builder and understand …
Forum
Steam Glorious Steam.
… ody to post something, in fact actually anything to do with steam. As that is not going to happen any time soon. I have decided to post a few photos of a rather nice steam launch called Topaz, an Edwardian launch a kit from Martin Baylis, H …
Forum
Steam Glorious Steam.
… likes to pick fault. Despite his vast knowledge of anything steam connected, he always tends to pick fault on very trivial issues. I tend to think of this as nit picking, in the fact he is not happy unless he can find some trivial fault to …
Forum
Steam Glorious Steam.
Hi Ian, I recon I should have guessed the steam plant was Microcosm, as I have bought a few of his engines in the past, and he does have a huge range of extra bits and pieces, as per fly ball governors and a very nice variable pitch propsha …
Forum
Steam Glorious Steam.
… and foremost welcome to this site and the fact you are into steam and all it has to offer. I really like your open launch a very near and tidy installation, nothing looks better than the combination of shiny brass and polished hardwood. I w …
Forum
Steam Glorious Steam.
Ian your man on the steam yacht needs a glass of wine or something. Though the pond police might not like open alcohol on board, especially if he is the skipper. Pepsi?? Be safe out there!
Forum
Steam Glorious Steam.
Steam and mahogany, possibly the ultimate "marriage" (as the French say). Combined with top workmanship - as here - is a joy to behold. My steam yacht here started life as a Kingston Moulding hull of the famous 1911 50 foot Steam-Pinnace-19 …
Forum
TVR1A Steam Engine.
… or easy-flow, that is the question? I have made a Windemere steam kettle, which will be fed from the bottom of the sight glass fitting, and it will be moved from its temporary location on the servo cover. Regards, Gary.
Forum
TVR1A Steam Engine.
… answer your question, I would say that yes the majority of steam boat users, are using gas and some have converted to gas, mind the majority of Saito engine users seem quite happy with their spirit fired blow lamp burners, this could easil …
Forum
motor for large paddle steamer. Advice required
… me . . . I already had problems finding space for my paddle steamer (130CM). My wife loves my hobby, but the size has to be suitable for our apartment and hobby room. So max. 150 cm (approx. 60 inches). I hope you have a great time restorin …
Forum
2nd voyage on Lake Paterno of the 1:60 scale model of a schooner-armed steam gunboat, assisted by a
… on Lake Turano of the 1:60 scale model of a schooner-armed steam gunboat, assisted by a 1:50 scale motor vessel. The model is not yet completed. Compared to the first voyage, the cannons and central lifeboats have been added. Navigation da …
Forum
2nd voyage on Lake Paterno of the 1:60 scale model of a schooner-armed steam gunboat, assisted by a
… he one I found. “The USS Tahoma was an Unadilla-class screw steam gunboat, one of 23 such vessels built rapidly for the Union Navy at the outbreak of the American Civil War. These "90-day gunboats" were designed for both ocean-going service …
Forum
For Sale - Model of The New Brighton Steam Lifeboat
For Sale - Model Of The New Brighton Steam Lifeboat - Excellent example of a model of the RNLI New Brighton Steam Lifeboat - museum quality. Fitted with a brass propellor and Mtronics Speed Controller, also comes with batteries. Charging po …
Forum
Steam launch stability dilemma..
Afternoon all! I bought a couple of small steam launches at the beginning of summer but didn't get around to testing them until recently. One is a Krick Anna with a Mamod twin cylinder engine and a basic "pot" boiler, the other a scratch bu …
Forum
Steam launch stability dilemma..
… here, that a sensible starting point would be to place the steam plant and other hardware, into the hull which is then placed into a bath full of water. then shuffle the hardware round to suit until it looks right, and then mark the positi …
Forum
Steam launch stability dilemma..
… floatation test. Which is to simply take the hardware, the steam plant, engine, condenser and gas tank, and place the boiler in a central position in the hull, with the engine behind it, and the condenser in front of it and the gas tank in …
Forum
Steam Engine information
I don’t know anything about this steam engine other than its a single cylinder, it has a flywheel, and cam shaft but is it useful for a model boat? What’s missing to make it work? Ron
Forum
Steam Engine information
… on. You would also need a fairly large boiler to keep it in steam, as it is a fairly heavy cast iron job it will take a fair bit steam to keep it going... Here is my example...
Forum
How Popular Are Live Steam Model Boats
Hello Shipmates How Popular Are Live Steam Model Boats - I have two but don't use them very often, do you have to get the boilers tested if you are not in the UK , if so how often ? Personally I like the models but find them expensive and h …
Forum
Gulnare steam paddle boat
hi all i need a little help i have recently bought a steam paddle boat called Gulnare the motor was not working to well it would stutter and stop so i have replaced it like for like with a mfa 450 but the out put was not good rpm of the mot …
Forum
Coastal Steamers
… https://www.dumasproducts.com/?product=city-of-buffalo-lake-steamer-1270