Arctic Convoy

By marky 17 entries 18 Nov 2019 — 22 Sep 2020
104Likes
122Comments
Chapter 11 / 17

17 chapters · Page 2 of 2

marky #11 of 17 1

Builders block

No not Lego,has anyone else suffered from this ?,builders block ,it must be similar to writers block ,you know what you want to do but just don't seem to be able to get anything done.
Don't know whether to start something else just to kick start the grey matter.
Cheers Marky
Liked by MouldBuilder and redpmg and
marky #12 of 17 1

Back in the groove

Having not been up to it for the last wee while and now feeling a bit like my old self thought it would be a nice time to fight through the spiders in the workshop and continue with Arctic convoy , having next to no materials I found an old bit of 3mm hardboard and decided to use it to plate the Hull ,decided to do away with the rails and give her solid bulwarks ,quite pleased with the results so far.
Cheers Marky
Liked by Colin H and Joe727 and
marky #13 of 17 1

Razzle dazzle

As the song goes "give 'em the old (😉) razzle dazzle "
After priming and then spraying matt White spent a while masking off the Black ,Blue ,yellow and grey area's ,will have to touch it up as the masking tape unmasked for some unknown reason ,quite happy with the results though .


😁😎
Liked by Inkoust and Colin H and
marky #14 of 17 1

Handrails

Started making up the handrails ,there made from 1/16" (1.6mm) mild steel gas welding rods soldered together ,made a jig for the straight lengths uprights drop through the holes ,rail is soldered on then assembly is pushed up to desired height and then second bar soldered in place ,only one small burn 🙄.
Cheers Marky👍
Liked by Inkoust and Colin H and
marky #15 of 17 1

Handrails Continued

That's all the Handrails soldered ,washed them in hot soapy water to clean off the flux residue , they ended up a bit over scale forgot about the thickness of the wire but its a model not a scale representation of an actual ship that's my excuse and I'm sticking to it 😁,a wee clean up and a paint next.
Cheers Marky👍
Liked by Inkoust and Colin H and
marky #16 of 17 1

Paint /weathering

Handrails ,mast's and life boats painted ,decided to try weathering don't know if I've gone slightly to far ? or would ships sailing the Arctic convoys be in a worse state?
Cheers Marky👍
Liked by stevedownunder and Martin555 and
marky #17 of 17 1

Nearly there

Having been nailed to a hospital bed and blasted with radiation and what felt like being hit with pick axe handles for the last few weeks am now back home so managed to do a bit on the ship so nearly there ,did some rigging ,more weathering ,hung the life boats and other odds and sods ,
Liked by RNinMunich and Dibdawg and

Delete this post?

It will be removed from the site.

Discard this draft?

Your draft will be deleted and cannot be recovered.

You have an unfinished draft

What would you like to do with it?