I found the basic boat, a Keil Kraft Sea Rover, in an old second hand shop some years ago, and decided to put her back together. Couldn't resist adding some figures to the deck, even a pair of binoculars.
I added a RC motor and took her to a nearby boating lake. Used a couple of times before retiring to the loft for the last 10 years.
Recently took her out and after a bit of polish and oil for the pro shaft, she's running well.
My question is, does anyone know what's she's worth?

here is my new addition to my fleet that I now sale in Staffordshire

this is my latest purchase a member of Tynemouth yachting club had it on e bay I have been after one for a while now the fun begins I will try & get a video of it on my attempt to sail it

HI All, E.Raymond is 36 inches long x 9 inches beam. She is scratch built, plank on frame with 3mm ply deck. I made her from the Cervia plans and enlarged them to 36 inches. She has a 540 type motor which I rewound with 80 turns of 30swg wire, for more torque. She has a 4 blade prop 60mm diam. and powered by a 6v 4amp SLA battery. I started the build last March, she's not quite finished yet, needs an anchor winch making and a set of tyres on the sides and other small details. I sail her at Holyhead Breakwater Park when I can.

Took inga out last night after years break for her stillest evening we've had for weeks so it mostly motored around the lake! did catch a bit of wind a couple of times.

Finally got it on the water again. New coupling from HK. Way to powerful, goes uncontrollable at speed with just prop in water!

This video follows on from my earlier post. I changed to running on a 5 cell lipo (18.5 volts) and I am very pleased with the Improvement over 14.4 volts Nicads. (Edit sorry Nimh`s) I put this link into my reply on my previous post but it didnt work as a hotlink so I am posting this.
The boat isnt quite flat out here due to the difficulty videoing and steering.
Les

Nautix 1/32 North Sea Fishing Trawler Our Lass II Whitby RTR Boat

A nicely detailed radio controlled 1/32nd scale model of the Whitby based 21.5 metre North Sea trawler Our Lass II. This vessel is typical of a number of modern, well equiped trawlers built in recent years. now sold my boat

HI heres a pic of the trawler in the pond in Herbert Park, Ballsbridge, Dublin.

Built from a kitishack kit 56" it runs on two Hobby King 750kv brushless motors I used brake pipe to make the motor cooling coils two 200a water cooled esc,s, I got the 5mm shafts & 42mm brass props and couplings from SHG models the power is supplied via two 14.8v lipos this is a really powerful boat

This was my first Coble now sailing up the coast on the Druridge bay country park lake runs on a Johnson 600 motor powered by a 3c lipo

it is ready to send to my pal in Scotland for him to finish
I have put a 10" shaft & a 42mm prop in with a Johnson 600 motor all the seats & rudder are made for him to fit along with the dodger that I am busy making for him, I will be starting another soon the planks & transom are cut ready to assemble on the jig