Built from scratch from plans supplied by my hobby store. has a fully remote controlled operating "elevating wheelhouse" with scissor type lifting legs. operating nav lights, fog horn and twin radar units. Also has remote operated forward winches for attaching pusher barges to the bow pusher posts. fitted with twin kort nozzles, handles a treat, steers well and could certanly push more than 3 barges!

based on a Lesro kit of the MK21 Sun tug. This slightly later version was fitted with fire monitors for handling tankers in the thames esturary as well as normal docking duites of liners and freighters.
Fitted with a decaperm 3:2 geared motor and twin 12v 7amphr batteries, it can run for several hours, even when towing other boats around the pool.. Fog horn installed, lighting system, working decca radar, Illuminated map desk and decca unit on the bridge.

here's a pic of my cowl vents that I moulded, with two of the white metal vents used to make the mould, also with one of the graupner vents

I will post more pics as I progress with the build

would a 60 to 70mm propellor be okay on a boat this size

this is my new build of a 60inch fire tender,bought plans from a ebay member in canada who resized them to 60 inch very large boat,don't know what size motor or prop to install so if anyone can help please advise me. would a 60 to 70mm propellor be okay on a boat this size? I will post more pics as I progress with the build. this boat is now in the build blog section with more pics of build

HI fellow modellers, Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was scratch built using a fibre glass hull and plan obtained from a fellow modeller at the Bridgend Show in 2007. The front door and some fittings are made from plastic card and tube, decks are from ply and timber. On board figures are from the pound shop and car boot sales, modified by myself. The on board tank and half truck are RTR models that I have modified their looks to fit into a WWII theme for the craft. This craft has twin drive, 400 motors via 2.5/1 gearboxes. I tend to use both sticks on the TX for drive as this allows me to turn the model on a six pence.The dispatch door works from a rotary pot on the TX and via a rotary sail winch servo in the hull. I have just modified my Planet 5 TX to allow me to change my radio gear in this craft. This model has had meny trips on Cwmbran Boating Lake and at shows the society attend during the year. Still haven't allowed the tank or half track to run off the landing craft up the lake side slipway. one day I might get it on video. Hope you enjoyed the photo's. Regards GreyWolf

HI Fellow Modellers,
Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was built from a Caldercraft Kit, This model came into my possession for the price of 20p, a raffle prize at Bryn Bach Model Clubs OPen Day 2010, when it was built is unknown. The item being made for display use and not finished off, no internal electronic fixtures. Did have a prop shaft and prop that had not been fitted correctly. 50% of all the fixtures had to be removed and refitted before they fell off, some didn't stay in place from the show back home. The model was finised off using a photo of the Milford star on the internet. The fish boxes and figures being obtained off DON one of the Society members who had a mould to make them in white metal, only required cleaning up and finishing off. A graupner 6 volt steam unit is fitted in the funnel and to make the boat a little more realistic on the water,a maplin steam sound system has been used to generate the sound of the engine. A simple mod allows the revs to be linked to the engine voltage. The drive motor is a 550 with the lowest revs I had in MJB's this was married up to a 2.5/1 gearbox I also had in stock. The main motor and steam unit are supplied from a 7.2 volt nicad racing pack. This model has had meny fishing trips on Cwmbran Boating Lake and at shows the Society visit. Hope you enjoy the pictures, Regards GreyWolf.

HI fellow Modellers,
Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was built using a Billings Kit, bought for me as a Christmas pressent in 2009. A graupner 6 volt steam unit is fitted in the funnel and to make the boat a little more realistic a maplin steam sound system has been used to generate the sound of the engine. A simple mod allows the revs to be linked to the engine voltage. The steam engine rotates using a stripped down minI servo, fitted under the motor housing on the deck, again linked to the main motor voltage. The two 9.6 volt AA batteries and control gear are mounted under the boats floor, forward locker, a minI servo for steerage is fitted under the rear seat and the receiver is located under the wood pile. Figures are self made from items obtained from the local pound shop. The modal can be seen sailing at Cwmbran Boating Lake or at shows the society visit. Hope you enjoy the pictures, Regards GreyWolf.

mdlbt.comdlbt.com/members/images/1077/1328788896-S.jpgm/members/images/1077/1328789028-S.jpg
more pictures

HI bit more deck works done winches crew , that's it for now,
Back on the shelf , to wait for running bits . time to back to trawler build......Larry..

Just a few more pics of ML1302, rudders and A frames are home made and scale brass props are used.