I bought the hull from a friend who moulds them then built it from pictures I had taken of the actual boat in Blyth harbour it runs on a Graupner 700bb motor 12v battery Robbe Fixed Kort Nozzle with Rudder & 60 mm Propeller lights on a separate 6v battery & figures from Adrian Clutterbuck
the ships cat was a stray

This is the fifth of the six sisters of the isle of Man Steam Packet Company, entered service in 1952 and scrapped in 1980. it is built on a Metcalf Models hull, and the superstructure is scratch-built from styrene. Fittings are a mix of scratch and purchased. it is powered by 2 Electronize motors with 2 ESC's by EA Electronics, has a smoke unit from Harbor Models controlled by a Viper ESC, a sound system from Model Sounds inc of Ontario, and powered by NiMH batteries. it is also fitted with a working bow rudder and lights, all controlled from a Robbe F14 Navy radio fitted with 2 twin sticks. Preferred sailing location is Lake Lisgar in Tillsonburg, Ontario.

I have bought it from Robbe in Germany. it is 7 years old and it is working very well. There are two brushed motor and navy ESC from Robbe. I use it to drive some lake and pool in my city.

Finaly after many months of searching, found a replacement drive motor for my Sea jet. Appologies for the short video clip, but its gives you enought to see. Absolute total fun to drive !

HI to all you Fire Boaters,
I have decided to finally bring my Fireboat out of the closet and up for inspection.
This is the first of my many boats I am showing, I will probably show others in the future.
I started to build her back in 2006 after being off work and having a shoulder operation. She was not going to be a R/C boat, just a bit of something to do whilst on recovery.

I have a 34" still in the box unmade, purchased back in 1994 from Aerokits.
I drew round all the parts and then shrunk them on my scanner. She is 27" long I think that's
just fraction over 1/20th scale . She is almost all balsa except the 2 under skins that are balsa laminated with 1/64th ply. The hand rails are 1/4" balsa blocks I cut from a strip and the rail is ally tubing.
The mast is made from plastic strip from packets from the model shop.

When I returned to work she was put into the shed and left unfinished.
I stumbled across the Fireboat website and registered in 2009 when I was off work once again. This then made me think more about working on her again and I decide to turn her into an R/C model. So out she came and I fitted an Electomax Delta 480bb motor and a M3sonik esc.
I also purchased a couple of Robbe fire monitors, put them together shortening the nozzles and cutting the bottom of the base of to try to look a bit moreto scale. I know they are not the correct type but if I want to go down the road of getting them working then these ones will.

Then off I went to Wilkinson's and bought some paint. Then set out to paint her, as I brushed on the paint it seemed to be drying almost as quick as I was painting her. Dragging the paint I had just put on with next brush stroke. What a TOTAL DISASTER !!. I gave up on her and back into the shed she went.

2010 arrived I started again rubbed the paint down a bit and bought some Tamiya spray acrylic and started spraying, underside red, it seemed look all right. I used a nice new roll of low tack masking tape, taped up the underside and the decking and sprayed on the black on the sides. I thought that look all right. Took off the masking tape, which also took off the red paint and the dope from the decks. Another DISASTER. Back in the shed she went once again.

A couple of months went by and I was up in Norfolk on my own boat and watching the workers in the boatyard, ideas came to me and when we returned home, out she came and I repainted the sides
and then with red oxide paint I painted her undersides to make it look like antI foul paint. I used some white stripe to cover the join of the two different paint colours.
I had bought some roundels in Anglia Model Shop in Gorleston and some lettering in a shop in Norwich and after painting put these on.
Not looking fantastic but passable I was a little happier with her, but still not satisfied, back in the shed she went again.

Now after so much nagging from my brother out she has come, I've started again. He talked me into changing and trying a brushless motor and a smaller esc he had in his tool box from his helicopter he was shelving as its rota head was damaged beyond repair.
I have now fitted them and if they work I will change the esc to a forward/ reverse esc in the future at some point.

Sea trials are still away off more than likely in the spring, because the decking has yet to be painted. That will be the next job.

I think that's all for now, as I have probably bored you all to tears. I hope update as I progress further.
Just to let you know I'm Tom (alias BOATSHED).

My own Dusseldorf,powered by origninal robbe navy direckts as these give more than sufficient power to propel the boat at a reasonable speed, all fire monitors operate to fire water and rotate, nav lights, radar, engine sound and fog horn.

twin robbe direckt motors with brass 40mm prop's. 12v battery 10 a/hr.

THIS IS N=MY ROBBE PT 15 BOAT ITS MY FIRST BOAT BUILD AND I THINK IVE DONE OK SO NOW I AM TRYING MY HAND AT A DUSSEL DORF FIRE BOAT NEXT "HA HA "SO ANY TIPS OR HELP WOULD BE MOST WELCOME

46 inch Crash Tender rescued from E-bay. Currently in the process of total restoration and have had to scratch build the entire super structure. Have fitted a Merco 61 engine with tuned pipe (the noise is awesome).

Have gone for it with the radio control- - employing a Robbe F14 plus an extra 8 channel module with decoder. So far extra controls are : each monitor (scratch built using brass pipe & sheet) left & right (using Robbe pulley set to give me 270 degrees travel), two Irvine water pumps, (real car) hooter, winch (using gearbox from Maplins) and movement for jib and search light.

This kit model of the seagoing tug Happy Hunter was started in 1983 by a friend of mine. Finding it too difficult, he let it lie until 2006 when he asked my son and I to build it.

After 219 hours work it is finished and sailing. it is powered by two 545 motors and a single speed controller and has 15 working lights, radar, bow thruster and crane, all of which operate. it is a real beauty, and I see Robbe have just brought out a new H H kit.

Robbe Nordernay owned by Dazz, (no more information provided)

46 inch Crash Tender rescued from E-bay. Currently in the process of total restoration and have had to scratch build the entire super structure. Have fitted a Merco 61 engine with tuned pipe (the noise is awesome).

Have gone for it with the radio control- - employing a Robbe F14 plus an extra 8 channel module with decoder. So far extra controls are : each monitor (scratch built using brass pipe & sheet) left & right (using Robbe pulley set to give me 270 degrees travel), two Irvine water pumps, (real car) hooter, winch (using gearbox from Maplins) and movement for jib and search light.

I sail at Brentwood in Essex - where you can still run IC boats.