I FOUND THIS AT A CAR BOOT SALE AND PAYED THE SELLER £8.00 CAN YOU BELIEVE IT .
It was made as a static model but that was going to change lot of work to be done it was a plank on frame .
The wife was not happy she says I have to meany boats I only have 36

Built from a plan in 'Model Boats' in the 80's with a balsa hull and ply decking. Powered by a single cylinder 'Unit Steam Engine' from the same era, and a meths fired boiler. Only recently has radio control been added.

Another loft find. Bought for £15 as a very delapidated static model. Converted for RC. Many new parts required and complete repaint from deck up. Up for sale as I have too many boats. Sorry you are to late the boat has been sold.

Toms twin brother who I hope will also join us on the Model Boats Forum

my mate Toms Drifter his 1st build I hope to get him to join Model Boats soon so he can share in the vast amount of knowledge on here

Designed by Vic Smeed in 1964 for the Magazine, Model Maker. Plan No. MM812. Found plans for free on internet and decided to build it as I did not have a vintage motor boat in my collection. Did not like the cabin so redesigned it. Powered by a Johnson 600 motor,2 * 7.2v 3300 mAh battery, 20 amp Mtroniks Viper Marine Controller and a 45mm dia course 2 bladed propeller. Goes really well.
Fitted trim tabs which finished the boats performance. Tested in rough weather and got 20 mins running on a fully charged battery.

Hull hollowed out and some bits from a static display model, based on several photo's of Greek fishing boats, Fish boxes from Coffee shop stirrers, Fish from long grain rice, Crew from Pound shop (Soldiers chopped & reshaped. ) She sails fairly well on first trial at Weymouth & Portland MBC, Miles Cross Farm lake .

Spec: M'tronics Vision 400 brushed motor, M'tronics 15a ESC, 12v SLA battery, 3 blade 30mm Prop. with Led Navigation and deck lights.

Chris

Saw the plans of 'Farmont' and could not resist the challange of this model. First problem was where and how to creat a removable cabin and decided on having the whole top removable other than the forward and aft decks. I also realised that the plans were simplified so a bit of research on Google revealed pictures of the real things for sale and some indepth pics of the boats being constructed. They omitted the bow breaker for ease of modelling but short cuts are not in my vocabulary. it is also difficult to visulise where all the stair cases go, so going online helped clarify this. I opted for a plank on frame construction covering the hull with a single layer of fibreglass and using lite ply and plasticard for the cabins. The deck planking was marked out with pencil before varnishing. I also wanted the boat to be fully lit and both radars to be operational and counter rotating (looks better from a spectators point of view). Completion date sometime in 2015, watch this space!

My latest project - Hull and some bits from a static display model, based on several photo's of Greek fishing boats, Mtroniks 400 motor, & 15A ESC, 12v SLA battery & 30mm 3 blade prop. Fish boxes from Coffee shop stirrers, Fish from long grain rice, Crew from Pound shop (Soldiers chopped & reshaped. )
She sails fairly well on first trial this week at Weymouth & Portland MBC, Miles Cross Farm lake . Hope to post video soon.
Chris

See forum and my harbour (CapnJim) for more details.
Just some footage of my weathered Model Slipways Puffer - now some years old but still cruisin'. Still appreciating the model and is one of my favourites. One day I'll build a puffer at 1/32nd. but for now this does very well.
Easy build but lots of opportunities to add detail. This has all the bells and whistles (well 'steam' whistle, smoke generator and puffer engine sound at least). Would fit in a briefcase but still able to stay afloat against the wash of bigger boats or blustery winds. Surprisingly, steers well when going astern. Speed with supplied motor about 2mph ' but this is faster than scale by a margin.
Clip prepared for YouTube resolution so best not viewed full screen.

Knightcote Model Boat Club. Film is of boats David Pledge and I have developed -- to be sold as kits soon. The Diana and Huntsman are tiny and powered by micro brushless motors. CR1700 is a new brushless club racer. See us at the Warwick show this week!

Sometime around 1968 I found a small set of drawings, about A4 size, for Sct. Knud in (I think) Ships Monthly. So I enlarged to 1:32 scale and made my model plank-on-frame with GRP overcoat. She is powered by a 6V Pittman motor driving a self-made scale prop and 2:1 gearbox. Steering is effected via chain and quadrant as per prototype! Everything bar the anchor, anchor chains and steering chains is self-made using a variety of materials (brass, plastics, 'Perspex', and copper electro-deposited cowl vents). Recently I fitted her out with LED lights: interior, navigation and working. One might notice that I abhor a working boat looking like "Daddy's yacht" and so I apply custom dings, stains, oil spills, scratches, wear and tear to my tugboats 😀 My Knud runs as well today as she did 45 years ago and in all that time has only needed one repair to her gearbox!