A test post on behalf of redpmg.
The engines are built by a mate of his.
"The boats are built by a 90+ year old gent by the name of Alan Raubenheimer, who used to make Rose Pop Pop Boats - used to advertise in MB etc.
Now into his 90s he has finally given up production."
Here goes🤞
Doug
It woiks 😊; just ignore the 'Invalid file' notice and click the blue magnifying glass and then the download button.
Run with Windows Media Player.
When it opens Press F11 for full screen or drag a corner with the cursor to enlarge.
Resolution is not too good I'm afraid🤔
Despite the music the action takes place in SA not Hawaii!😉

PS 8.5.20. Video fixed and enhanced a little 😀😎

This is my newest project an Ebay buy of a delapidated HSL possibly used to advertise Model boat insurance at some time maybe 50 years old !. I have removed all broken, out of scale and incorrect items, removed old repairs and internal engine mounts. Superstructure is not too accurate but good enough to keep. I have noticed the keel is slightly twisted so will have to try and rectify that and the rear deck is going to be removed also as the adhesive is soft and pliable and there is no rigidity in the build aft of the superstructure. I intend fitting 2 x 12v johnson 600 type brushed motors as the original had 2 props. I have plenty of photos of the external layout but lack any detail of the open bridge 😟 . I think this will be a difficult project to complete hope I do it justice

This is my ** version of the Sea Queen. My father owns one of the originals and when one lunch time I saw one on the ** web site I knew I had to get one.
It was to be a winter build project and work started in the autumn of 2006 and it was launched in May 2007. I was very disappointed to see the all white paint finish used on the ** advertisements and decided I was going to re-create the look of the original. Cosmetically the big problem was that the original used mahogany finish ply for the cabin sides and the ** version was just plain birch. However after a bit of staining I was quite happy with the finished colour. This was contrasted against clear coated lime wood deck planking.
Also ***a€™s bag of fittings missed out on the signature life belts so I had to make my own.

One Improvement that I did make was the inclusion of a dashboard, instrument panel and throttle slide.

The graphic on the transom was a custom cut from callie-graphics.

The supplied motor was replaced with an MFA Torpedo 850 which is a direct replacement. ( Same mount, same screw fixing centres etc ).
Battery is a 12V 7A gel cell, ESC is an Mtronics Marine Viper 40A