๐ my fleet in the pool
4 years ago by
๐ฌ๐ง 0151rogers (
Leading Seaman)
Flag
▲
โฉโฉ
No likes yet
This member will receive 1 point
for every like received
๐ฌ Re: large smit tug duel esc
5 years ago by
๐ฌ๐ง 0151rogers (
Leading Seaman)
Flag
running 12 volt mate to two viper esc one with red wire removed to reciver as my motors need to be independently controlled as this is set up as tank steer cheers mark
▲
โฉโฉ
No likes yet
This member will receive 1 point
for every like received
๐ my harbour
5 years ago by
๐ฌ๐ง 0151rogers (
Leading Seaman)
Flag
▲
โฉโฉ
No likes yet
This member will receive 1 point
for every like received
๐ฌ Re: large smit tug duel esc
5 years ago by
๐ฌ๐ง 0151rogers (
Leading Seaman)
Flag
Thanks mate the wires were tidy until the ESC puffed smoke just pulled everything out as I said was working fine so thought final fix powered up and fuse blew new fuse and same again tryed it one more time and smoke will be fitting A new ESC and hopefully all good yes she is heavy but transport her in bits not too bad cheers mark
▲
โฉโฉ
No likes yet
This member will receive 1 point
for every like received
๐ฌ Re: large smit tug duel esc
5 years ago by
๐ฌ๐ง 0151rogers (
Leading Seaman)
Flag
▲
โฉโฉ
No likes yet
This member will receive 1 point
for every like received
๐ large smit tug duel esc
5 years ago by
๐ฌ๐ง 0151rogers (
Leading Seaman)
Flag
hi just finished putting new motors, torpedo 800's in my tug had it running off one 12 volt batt with two 20amp viper speed controllers removed one esc red wire so each prop was individually controlled as no rudder, tank turn all was well in test so today tidyed the wires and fixed them in place and tested it again one of my esc kept blowing fuses and smelt of burning this is the one that powers the receiver took it out of the boat tested it on a battery and puff of smoke phoned howes were i bought them they said send it back and we will look at it never had any issues with vipers so hoping its just a dodgy esc will let you know how i get on and but some picks of my boats up cheers Mark
▲
โฉโฉ
No likes yet
This member will receive 1 point
for every like received
๐ my aluminium barge a meter long
10 years ago by
๐ฌ๐ง 0151rogers (
Leading Seaman)
Flag
I made a wooden barge for my tugs to pull but found this too heavy so I asked my old firm to make me one in 4mm aluminium it has been fully seem welded and is water tight .I got them to powder coat the whole barge in black matt and I just added the red paint. The top just slides off so I can change the cargo I just wish that I had not made this so deep as it sits high in the water unless I add a load of ballast am using a 10 ltr water container at the min and its still work in progress
▲
โฉโฉ
No likes yet
This member will receive 1 point
for every like received
๐ oakgarth ,doug the tug and a small seaport tug
10 years ago by
๐ฌ๐ง 0151rogers (
Leading Seaman)
Flag
▲
โฉโฉ
No likes yet
This member will receive 1 point
for every like received