try machinary decals..fella called titch..........very helpful chap

hI dave, the props are 4omm Iv put 2oamp fuses in and its been ok but I havent stalled the boat against the bank again. Iv been practacing being slow and accurate rather than blasting about...saying that though the little tug is much faster than a narrow boat doing 4 mph as Iv raced a few 😁

hi, Im In shropshire...iv got a pusher tug and a mobile marine lady jan tug..the lady jan Is a nice sort of a thing ,the pusher tug seems to be a bit of a hooligan tool..........is there any clubs or gatherings for the pusher tugs???

ps I live on a water way so anyone local with a tug that wants a bean bag on our front deck to run there boats there welcome

hi. Iv fitted a pair of mtronic viper 15 amp esc's..each having there own 15amp fuse servicing each esc..........it runs nicely and does move some water..if I put the tug against the bank and throttle it up it blows the fuse on each motor..I ran the leeft motor gradually increasing power and fuse blew..I repeated this with the right engine and it did the same......can you tell me what these motors are please and what power should draw??

many thanks grace

they are 80mm long if thats any help

all sorted it was the brand new servo that was dodgy.....I changed it for an expensive one out of my nitro truck and alls well..........I bought a pusher tug to play with whilst I got lady jan sorted.11.45pm I thought id drop the pusher tug in the water and have a play with it, (it has lights 😶 )as soon as I gave it some power it blew the main 10 amp fuse and left it dead in the water,eventualy I retreaved the pusher tug and headed for the engine room (I live on a 62ft tug)and sorted lady jans servo issues now 2am 😁 ..............


problem number 2............my pusher tug has a pair of geared motor's running one esc..my plan is to run each motor independantly via a pair of esc's.....how do I test and see if one of the motors is drawing to much power?? I have a dc clamp meter that test amps????

hi, Im now on 2 channel analog and its the same esc works in both ports of the receaver but the servo freaks out.........im a bit stuck with it...

hi, Iv bought a mobile marine lady jan........its a completed model......its running a t12 motor.......electronize fr15hvr esc......and a futaba steering servo all good so far...I bought a planet 2.4g 5 channel radio for It......I put the radio In, the esc worked fine,the steering servo threw a wobbler when you turn the transmitter on.......the steering servo stopped working........I replaced the servo with a cheapy from the local model shop.that did the same..so I changer the receaver and tranny to an analog set and the steering servo still playing up doing the same.swapped the esc for a new mtronics esc still the same...iv swapped the wiring extension to the steering servo Incase that had shorted even took the servo out the boat and collected It straight to the receaver..the main 12v battery Is charged up.........................iv had a fare amount to do with rc cars mainly fg 5th scale and nitro.....this has got me completely lost...PLEASE HELP!!!!! 😭

hi, if you have a look at deben tracer lithium batteries..they do a 24 amp battery that weighs less than a pair of 7amp pb's.....the deben battery is 12v and deep cycle