Although not strictly speaking a boat it is a yacht and fun when you can't get to the pond but fancy a sail!

Built from magazine free plans mainly of balsa, carbon mast and drafting film it is just as challenging as normal RC sailing.

Operated on a 2CH Rc is has front wheel steering. The wheels are model aircraft wheels. The rear outrigger wheels and mast can easily be dsmantled for transportation. The outrigger is also ballasted to Improve handling.

Mantua models 'Amalfi' Scale 1:35 Length 400mm. Fishing boat converted to 2 CH RC. Sails well, freeboard a little low but ok. Nets detactable for heavier weather sailing!

Photos show her on home 12' dia. pool but she sails well on boating pond. Runs for 20mins. on 4xAA batteries all in.

Super detailed HFM kit to 1/35th scale of Thames Sailing barge. No power, two channel RC. Often sails at Basingstoke.

sunday sailing on Cwmbran Model Society water

This was scratch built apart from the fibre glass hull which I purchased.
Model is 65" long with a beam of 10". Power is by electric running via a gearbox at 300 rpm. Ihave taken almost 2years to complete the model working most days on it. Attention to detail was the order of the day.
I am using a Planet T5 Tx and Rx, 5 channels. I have a smoke generator pushing steam out of the twin funnels,synchronised to forward speed, faster the revs, faster the steam. Conventional rudder operation.
Have an operating Radar, ships horn, simulated steam noise varies as speed is altered, full navigation lights,all cabin lights can be switched on and to keep the 106 passengers happy I have a Banjo Band playing to complete the scene. Have sailed it recently at Peterborough and performs really really well. Have to say it tends to attract a lot of interest.
I am now constructing the Ayton Cross tug in 1:32 scale, with all the detail I want.Plan is to tow the Jeanie Deans around when completed as well assailing her

Two Wavemasters, both refurbished ebay rescues, sailing at Crealy, near Exeter (one of the last times as the club can no longer use the water).
The first, rebuilt by Kalamunda, is brushless with NiMh cells and the second, having it's first sail since being rebuilt by Ian Gardner, has a Graupner 700 with 3s Lipo's (in parallel) on a 37.5mm X type prop- Electronize 30amp esc.
I think these are lovely looking old boats designed by Les Rowell of Aerokits fame, and obviously based on traditional cruisers from the Norfolk Broads- see Martham Boats, where you can still hire a wooden craft like these, although you'd definitely have the river inspector after you if you sailed up the Thurne at these speeds!

Built this year 2012 by Colin Burrows as a static model. Bought from him to make RC on 2.4. and currently fitted with a 600 motor that is too powerful, advise that was received from a fellow modeller, I am awaiting for a smaller unit to arrive to make it more authentic as it resembles a power boat rather than a trawler. Am also building a speed boat but have put out a request for wiring information as I have already blown up one speed controller!! lol.
I belong to a recently formed club sailing on the lake a Queens Park, Mablethorpe, Lincolnshire. New members would be most welcomed.

Believed to be scratch built, evidence of old 1 gallon REDEX oil container forming main deck, bits of Mecano used as stiffening and support.
It has a Basset Lowke model 1461/u (motor, stern tube, prop shaft and prop) Set.This dates from the mid 1930's and would have cost 7/- Shillings for those old enough to remember, that would have been abut a day and a half's wages. The photo's show what the motor looked like as it came out and then after cleaning and testing, and yes it runs very smoothly in forward and reverse, from 3 volts up to 12 volts, seems to be quite good at 6, so will probably use when rebuild complete.
As you will see from photo's there is a lot of restoration to do before sailing again.
Now you've stopped laughing, can you identify the type of ship it's meant to be, I thought a Coaster.

I have had this boat for about 5 years, so thought that it would like a day out. Sailing at Cwmbran August 2012. its a Billing Polar Trawler, not now made but at about 32 inch long is a managable size. Twin 385 motors 35mm 3 blade brass props. and running on a 7.2 volt 3700 mAh NiMh viper speed controller and a 2.4 Ghz RC it will potter around all morning on one battery. I originally ran it on a 6Volt 4Ah Gel Cell and 27 Mhz setup.

This is a scratch built 1;16 fishing/motor sailor from a free plan by james pottinger, made from old teak furniture with mahogany wheelhouse, technobots sound system, 12 volt power shower motor, the original was built by james adams at gourock in 1946 and is still sailing in the western isles of scotland.

Bill finally launched his boat. 😀 The weather was kind for some of the time so I was able to take some pictures and a short (not very good) video on the water.

this is my boat built from the aerokits plans. she is the 46 inch version, power is from a brushless motor and lipo set up. sailing trials over easter hols weather permitting!