This very large Vosper RTTL was active at the Oxford Model Boat Club open day on the 7th July. At aprox 6 feet long, it is the work of Terry Gregory (hull and electronics) and Paul Izzard( superstructure). It is a spectacular performer and beautifully finished though the enormous wake means that it is normally run solo on the water.
This is my model of the KG5. Futaba 2 ch, electronize ESC, 12v 7amp gell cell battery. The motor is from a Ford radiator fan and pulls 1 amp current. Scratch built in the 60.70s and revamped in the 90s by myself. it is 1/96 scale @ 72 inches long and a width of 14 inches.
Saved from a farm rubbish bin and restored. It was originally scratch built from a 60s/70s RCM ? plan. Photos of rebuild are in the harbour. Not sure if it was originally built in the UK and immigrated to NZ as it's an unusual subject for a NZ build. Plans are apparently still available.
I've just found some info on Bates 'Starcraft' cruisers, UK. Looks like the original R/C plan may have been modeled on a version of one of the 'Starcraft' variants.
The farm is a fair way from the sea,- someone was not on watch obviously. Not my car, some guys doing building maint. We can park on that cobbled area you've pictured on the opposite side, (room for about 8-10 cars,-usually chokka when the yachts are racing) There is a nice little jetty built by the Gulf Harbour Model Yacht Club next to it which is great for setting up and launching. It's all part of the big Gulf Harbour Marina development and pond is actually a drainage control pond.
Was full of Koi carp to keep the weed down (carp were rented from a company by the council, but there was some dispute and the company came and removed their carp) probably missed a lot and they breed like flies, so it should come right. Pond's pretty weed free all the same. Pics of the jetty (from the HSL) with some old codger sitting on it, and the real HSL in the Bayswater Marina (Waitemata harbour Auckland), which I have been on board (once recently,-Modded- and once 50yrs ago-original form) Its' story is on the Waitemata Woodys website under W1.
The other pond is at the Onepoto reserve near the city on the waterfront. Bit of a drive (20mins down the motorway all the way) Yachts there as well. The pics with the Marine modellers club - Panmure Basin - East Auckland (the only scale model boat club in Auckland and virtually dead (pics are old), - only about 3 or 4 scale clubs in the country!) we tend to go more for the full scale here. Evening, JB
Well, what a lovely day it is today and here is a pic or two of my Boston which I built several years ago - I had to rebuild her recently that was due to the plasticard I used for the bulwarks had perished and when I picked the model up the plasticard bulwarks cracked and fell apart, so I have rebuilt with wood. Plastic was from the 1980s when I built the model.
Know what you mean John,
I first built my H Class destroyer in the mid 60s.
Mostly balsa but some plastic.
When I started refitting her about 32 years ago most of the plastic bits crumbled and fell apart.😭 Binders were all leached out 😮😭
Only plastic stuff that survived were the Airfix 1/72 8th Army and Afrika Corps soldiers I had shanghaied into the Navy!😁
Who still says 'They don't make stuff like they used to'??
I rebuilt the superstructure using 0.5mm marine ply.
Nice rebuild John, keep 'em comin' 👍
Doug 😎
This is a 1984 re-issue of a Lindberg Chris Craft Sport fishermen purchased used on Ebay. Some of the parts where broken and some partially assembled. The model did come with 2 MACK RC motors and some fabricated wood parts, including a template for the aft deck. The interior was assembled from quarter scale doll house items except for the dinette. There are 4 underwater LED bulbs with a dedicated power supply. The running, interior and radar unit are powered by a separate systems from the hull electrics. The second Li-po battery is for backup and balast. There are number of additional items added since these photos were taken including a stern seat and larger radar array .
Here's my current project. This is an upgrade of an old model. I retained the hull from a German-made kit from the firm Krick (model "Lisa M") and re-made the upper deck and cabin using 3mm thick ABS plastic to resemble an American type "Down East" type boat. Here is on its sea trial past weekend and during its first light system test.
🤞I noticed there are a great deal of RAF plans for various fire tender etc but is there a kit for a Seaplane Tender like ST480 (based at Lyme Regis where this photo was taken) that picked up a pilot off Chesil Beach on 8th November 1941. I am about to put on a display regarding the aircraft and pilot and their history and I have a model of the aircraft a Curtiss P40 Tomahawk and would love to have a Seaplane Tender model on display.
The Lake Illawong Model Boats club and Task Force 72 Fleet Base Victoria had a combined display at the 2019 Sandown Train and Hobby Show. This video is compiled from the first 2 of the 3 days. We even had a pond erected, but unfortunately a few small leaks restricted its use.
I hadn't built a model of any sort since I was 15 years old and that was a control line aeroplane with a glow worm engine. 45 years later and regressing nicely back to my teenage years, my wife bought me (reluctantly!) a RC Boat Kit - Mowe 2. I had been wanting to build again for many years, but children and family and home situation did not allow.
So, over the cold Autumn and Winter Months I carefully put my spare nights to good use, rather than watching night after night TV box sets and re-watching the entire James Bond movies, not once but 2 or 3 times....
Anyhow after 3 months...the finished product. I should have started a blog but didn't know of this site until a few weeks ago.
Not a brilliant finished job, but a satisfying one, and it sails nicely on Bushy Park boating lake in Kingston-upon-Thames.
Now o nto bigger and more complicated things...a Fairey Huntsman 31.
This time I'll do a blog....👍
