Using the modified fan forced Heng Long smoker box, and a dead unit pump to pulse the smoke. This version is a 'dry stack one', which would look good on tugs and work boats. Still working on perfecting the 'wet' version.
Told you to get on with a new project before you sank the ship........ Interesting that Bluebottle is still around - so which one are you ??????? Next thing you will be talking about Iceland Parrots (aka wheels-up) . What were you putting in the smoker ..............
Hi Peter, if you meant what am I using for the smoke,it's baby oil, or if you meant what am I putting this system in - nothing as yet. have to reduce the size, but I could fit it in the Fairacre or the Maiami as I have enough room in both to fit something.
JB
This Aeronaut Kalle Harbour Tug had seen better days when I acquired it last month, after some remedial work it is now taking some shape, there is still plenty of work to do but I feel I am getting there.
Finally completed after near enough four years work off and on. Mind I am very happy with the result, the superstructure was slightly modified so as the steam plant can be removed easily in one piece.
Just built Krick RO-Marin Neptun. First tug I’ve built, she came out okay, I think. 6volt system, MFA 2.5 geared motor, Graupner SXM switch controlling the lights, older Pixie brushed esc controlling water monitor pump. Old Futaba MC210 for motor esc, Frysky QX7 radio. This video was shot at Towne Lake, McKinney Texas. She well on her maiden, needs about 2-4 ounces ballast in the stern though.
This is the Dumas US Army tug kit showing the two hull halves being glued together, I hope to modify the model to replicate the tug I was Petty Officer in Charge of while in the Navy!
I bought the Moorcock from a fellow boater and decided to rebuild her as the Moorcock. The hull was stripped bare and the prop-shaft tube removed and completely remade with a new prop. The hull was then repainted and the life boat and davits added The superstructure was cleaned up and remade with a Robbe spring loaded grappling iron added to the rear deck.She is powered by a 24v scooted motor salvaged from a garbage bin and has 4 x 12v 7amh SLA's to provide power. She is a good strong vesel to sail and is often used as a recovery tug.
Scratch building a barge for my tugboat Miss Doris to push. May deck it over to become a tank barge I used to push on the Delaware River. if
i do deck it over, I'll hinge the deck to make use of the space for my RC gear.
Thanks for posting the photo of the barge build, gives me some ideas.... I have some tugs in progress, but no barges. I like the way you framed the hull. Joe
This ship was a lightship tender named "Coeur de Lion" that was armed and drafted into the Union during the civil war to counter blockade runners. This model is scratch built and is inspired by a paper model designed by Magnus Mörck. A sidewheel steamer equipped with the typical walking beam machinery, it was rebuilt to carry three guns. A line of iron plates along the gun wales added a measure of armoured protection. After the war it was returned to lightship service. On my model the paddles are independently driven, mainly because I have a Robbe Navy F14 transmitter with twin sticks. The walking beam is operated by a servo modified for continuous rotation. The original ship towed a barge that flew an observation balloon and could be described as the first 'aircraft carrier' the fifth picture shows the barge I have made - I hope one day to emulate the real thing by raising and lowering a suitable balloon. I have included some pictures of the rest of my paddle fleet.The 'Rachel Erin' is a freelance sternwheeler 'quarter wheeler' tug that uses a worm drive to the paddles. She does not steer well. The last ship is an enlarged version of Graham Goodchild's Santa Anna.
This is one of the limited edition Sirmar kits that was produce in the early 1990’s.this model was made by a friend of mine who’s a dockyard fitter and turner it was made about twenty eight years ago. Based on a tug that I worked on in and around Portsmouth harbour. This model has a working voith unit opening engine room skylights. Working lights, removable deck hatch to get at the unit like the real boat, the superstructure and gun whales are made from plasticard. The fender was made by a friend to the same type as used on the tug. The wheelhouse is copied like for like. The towing hook is copied from photos and slips like the real one. in all my years I haven’t seen another one like this . Sirmar made twenty numbered hulls as kits .
JB