I bought the Moorcock from a fellow boater and decided to rebuild her as the Moorcock. The hull was stripped bare and the prop-shaft tube removed and completely remade with a new prop. The hull was then repainted and the life boat and davits added The superstructure was cleaned up and remade with a Robbe spring loaded grappling iron added to the rear deck.She is powered by a 24v scooted motor salvaged from a garbage bin and has 4 x 12v 7amh SLA's to provide power. She is a good strong vesel to sail and is often used as a recovery tug.

This is a 1:100 scratch build of an (unnamed) Fort/Park class freighter, based on Jim Pottinger's drawings of a North Sands design. I'm building this as a DEMS ship. it has smoke and an overboard water discharge (if it works!).

These ships were built in many Canadian shipyards during WW2. Some went to British Admiralty - with Fort XXX names - and some went to Canadian government - named for Can. parks.

I haven't yet decided on the name for this model.

total scratch built on fibreglass hull 127cm x24 cm,11 months to build 6volt system brushed motor,3blade 35mm brass prop.

Here's my Robbe smaragd, its about 30 years old and recently I have refitted some electronics. sailwinch replaced for the genua fore sail. it just did not function very well.
It sails like a beauty and very steady on coarse.

here is my Robbe Sirius, the Stock maritime tuned version.
I traded an iphone 5c for this model.
it was in a used state without any working electronics.
Completely removed all electronics, stickers and rigg and started with sanding.
resprayed the hull in oyster 'pearl metalic' and started building up with new fittings , electronics etc
Sails like a beauty !

here is my 2nd Graupner Carina ( after the 1st one I just wanted to built another one and Ebay supplied - again- a 'barely started' set.
Taking apart the glued wooden parts was a bit of a challenge. However, the previous owner used cheap glue and all the parts could be dismounted without any damage.
(will post more pictures of the rebuilt )

Here's my "juliette' my 1st Graupner Carina from the old days !
|I bought her in a 'barely started condition' and took everything apart. Built her up step by step> (will post more pictures later)

Scratch Built patrol boat of BN. Cruises pretty smooth and nice. A bit heavy I guess, put a lot stuff there.

just picked this one up and it might sit there for a few weeks / months 😡 as other projects on the go now 👍 will need motor rudder and lots of work 😊

This is a first try at a simpler quieter smoke unit. I used the smoker box/element off the Heng Long tank/car smoker unit with a 40x40 5v fan (the fan being voltage controlled by a 5v UBEC and the lot being run by a 2s Lipo (with a y splitter for the fan UBEC and the element using JST leads. Doesn't smoke that well as I had broken then repaired the element previously, but the other one I have smokes a lot better, and has a better type of element (possibly a newer version) Some photos etc on the smoker discussion. Unit is almost silent (the noise you hear is the camera and outside noise, as the window was open)

Just renovated this one not been used of several years, I need to get back into sailing, was running on a 400 size motor now on a outrunner Mystery D2632-100 and it seems to go very well, will post it on the water later.

Only just seen this thread, don't know how I missed it? Some lovely boats.

Here's my Fairey River Cruiser which is in the process of being built along with a couple of other Faireys. Chris