Photos & videos
Search results
7 postsI added a RC motor and took her to a nearby boating lake. Used a couple of times before retiring to the loft for the last 10 years.
Recently took her out and after a bit of polish and oil for the pro shaft, she's running well.
My question is, does anyone know what's she's worth?
Taycol Meteor motor contemporary with boat controlled by servo operated resistance with sweeper arm on servo to reverse polarity at approx. midpoint.
Motor not powerful enough and max. speed disappointing so am planning to upgrade wiht more modern gear.
- triumphjonMaster Seamanshould anybody be interested these models are now for sale , Im giving up modelling !should anybody be interested these models are now for sale , Im giving up modelling !
- triumphjonMaster Seamanmodel now for sale , includes the 600 motor mtroniks viper 20 amp esc and rudder servo , ÂA£75model now for sale , includes the 600 motor mtroniks viper 20 amp esc and rudder servo , ÂA£75
- dbninjaChief Petty Officer 2nd ClassKalamunda, I could send you a set of paper templates from mine if thats any help? pm me for details. I need the plan details for the supports for the canopy for mine, will send you some photos too if thats a helpKalamunda, I could send you a set of paper templates from mine if thats any help? pm me for details. I need the plan details for the supports for the canopy for mine, will send you some photos too if thats a help david
david
the camera lies.. its no where near as good as the camera makes it look. but it is all there.
will be getting the full restoration, hull is sound, superstructure is very fragile.
my Aerokits fleet now includes..
34" fireboat x 2 (1 restored)
fast patrol launch
sea scout (restored)
sea rover
sea commander
fairey swordsman
David
- triumphjonMaster Seamanfollowing a couple new modifications my sea rover has been re motored with a vision 600 without the two torque rings , now running a 7.2 or 9.6 battery pack fitted under the rear floor , Ive also reinstated the box at the stern which has my steering servo mounted underneath it , the "box is to full deck height with a removable top for servo acsess , Ive included a helm position c/w a period helmsman ( hes still got his teddy boy quiff ! ) although Ive not fitted the roof over the cockpit , Ive also cut a door into the front cabin , which will in time have a pair of opening barn doors & a small hinged top hatch over them . working 3mm led navigation and cabin lamps have also been fitted although Ive used a more modern cover for them , After looking through one of my magazines the sea rover bears a very close resembelance to a moody 27 gentlemans sports boat of the mid sixties !following a couple new modifications my sea rover has been re motored with a vision 600 without the two torque rings , now running a 7.2 or 9.6 battery pack fitted under the rear floor , Ive also reinstated the box at the stern which has my steering servo mounted underneath it , the "box is to full deck height with a removable top for servo acsess , Ive included a helm position c/w a period helmsman ( hes still got his teddy boy quiff ! ) although Ive not fitted the roof over the cockpit , Ive also cut a door into the front cabin , which will in time have a pair of opening barn doors & a small hinged top hatch over them . working 3mm led navigation and cabin lamps have also been fitted although Ive used a more modern cover for them , After looking through one of my magazines the sea rover bears a very close resembelance to a moody 27 gentlemans sports boat of the mid sixties !
- BigChrisRecruitI have two sea rovers - both bought off e-bay. The first is in virtually original condition down to the original motor and speed controller although the speed controller now seems to have given up the ghost so will be replaced with a viper plug and play. I have added a small mast and wired in nav and masthead lights. it sails beautifully and creates a load of interest at the pond sideI have two sea rovers - both bought off e-bay. The first is in virtually original condition down to the original motor and speed controller although the speed controller now seems to have given up the ghost so will be replaced with a viper plug and play. I have added a small mast and wired in nav and masthead lights. it sails beautifully and creates a load of interest at the pond side The second more recent acquisition is an abandoned project, but with most of the construction work done. I have had to rebuild the windscreen frame and I have done this by laminating plasticard. I have to say the finished affect is pretty good although purists are probably tearing their hair out at the very thought of using plasticard! Ah well everyone is entitled to their opinion.
The second more recent acquisition is an abandoned project, but with most of the construction work done. I have had to rebuild the windscreen frame and I have done this by laminating plasticard. I have to say the finished affect is pretty good although purists are probably tearing their hair out at the very thought of using plasticard! Ah well everyone is entitled to their opinion.