HI guys I've been luckily enough to of had the chance to buy this boat at the Heywood bring and buy.
It's in 1/16 scale and is four foot long. it's a complete scratch built hull using plastic sign bord.
The hull was built by Nick Rigby from our club in Bury.
All the rest of the detail has been done by his friend.
At the Monment she has the props installed but no motors.
I will be fitting her out with a couple of 900kv brushless motors and a couple of 90amp esc's all water cooled.plus two 11.1volt 5000ma lipo's in parallel to give a long run time. Hope you like the pictures!

Trent lifeboat Still under construction at 12 Months in.

Nearly finished at 3rd July 2013 - just the final touches.

First sailing 1st August 2013 - Sunny and warmest day of the year.

here is my 34" 1/16 scale Fireboat with the ultimate accessory..

my 1/16 scale Sunderland Flying Boat! which was test flown today

got to be the first time in 70 years that these two were seen on the water together..

David

The tugs are towing the chantry club 16ft towboat, the two tugs are 1/32nd scale scratch built with 12 volt motors, they are The Vanquisher and The Dhulia, both River Thames tugs and in real life could be seen working together at Thames Haven oil terminals towing Tankers.

Hi,
A photo of my Whaleback hull from Model Booat Shack remainder will be scratch built.

Just a few more pics, this time of the 1/24th Scale Deans Marine kit I used to scale up the superstructure dimensions for the restoration of my fathers 1/16th scale ST below. Again although built some 2 years ago this was it's first outing on a lake, once more at Crealy near Exeter.
Both 441 & 1515 operated out of Lyme Regis in WW2, 441 on record of rescuing the complete crew of a downed Flying Fortress and 1515 picking up 26 paratroops from Lyme Bay on D day.

First outing in 51 years for my 1/16th scale Seaplane tender, built originally by my father in 1953 and believed to be an Adamcraft Kit, found with a damaged hull and virtually no superstructure in the loft of their house after my mother had moved to a residential home several years ago. I had moved to Lyme Regis in Dorset where several of these craft were based and which was my fathers inspiration for building this initially, so I thought it time to try and restore her.
I had some difficulty finding plans of the ST and eventually bought and built the Deans Marine 1/24th version of this craft, which I then scaled up to rebuild the original.
Power is by a 600 motor with 2 channel radio and seems to work
well on a 7.2 v battery pack.
I've now joined Exeter & District MBC as it appears to be one of the nearest to us in Lyme and the pics show the ST on the Dragonfly Lake at Crealy.
I would be interested in any info. anyone might have as to Adamcraft as my searches have turned up very little. I believe they specified a Tacol electric or Mills 1.3 petrol engine at the time, but my memory might well be flawed as I was only around 10years old at the time.

I have just acquired this model via a swap for my Al Khubar Tug. I am in the process of deciding which actual lifeboat to model. This is based on the Metcalfe Moulding and is 1/12 scale at 52". in its present condition it has two Buhler motors and some early ESC's. Power is from a 12v 7Ahr dry cell. it looks great on the water but duration is not that great. I am preparing for a complete rebuild including re-prop shafting and different motors. I may rebuild the cabin as the moulding I have was only used on 5 Arun's and I may not be able to get enough details. I have sourced a plan and have detail pictures for City of Glasgow 111 (needs new cabin). Awaiting a book "RNLI Motor Lifeboats" from Amazon to help me progress. The present crew will have to be relocated to a 16th scale model! if I remember to take photos I will post a build blog.

Built using the Aerokits plans and information from the original Air Ministry build spec.

Boat is 1/16th scale - twin motors with a mixer.

W165 was built by Roger Forlines, he's a member of Shelton Scale Ship Modelers R/C boat club.

This boat took six months to build and is to Scale as laid down by model manufacture, the boat was weathered to depict a long voyage on the north seas.

Also, the Jim Wilder tug, this took four months to build and has been built to look like a turn of the century steam tug which worked the San Fransisco bay area.

The last picture it is dressed up for Christmas.