Was given this as a hull which had been started 25 yrs ago, along with some superstructure parts. Without other materials to finish it off, I gave it what I could find and here is where it is today.
Motor is 340 Graupner geared 3:1 & 7.2v 2400 NiMH
Can not provide any specific sailing details until it has been in the pond which could be awhile...se my front and back yard!
here is my 2nd Graupner Carina ( after the 1st one I just wanted to built another one and Ebay supplied - again- a 'barely started' set.
Taking apart the glued wooden parts was a bit of a challenge. However, the previous owner used cheap glue and all the parts could be dismounted without any damage.
(will post more pictures of the rebuilt )
Here's my "juliette' my 1st Graupner Carina from the old days !
|I bought her in a 'barely started condition' and took everything apart. Built her up step by step> (will post more pictures later)
This is a restoration of a launch I was given that was found in a rubbish bin on a farm here in Auckland it is an old RCM ? plan built 'Fairacre' and was pretty rotten when I received it as it is made in balsa and had been wet for quite a while. I stripped it down, re 'planked' large portions of the hull and fiber glassed it, re- built the cabin, re- marked the deck planks, fitted lights, curtains (ex Graupner Commodore bits from the 70s I had kept), stern ladder, cleats etc. it is fitted with a 540 brushed motor (originally had an old Graupner monoperm) and 70s Graupner ESC and Using 2.4 Radio gear. I still have a few things I'd like to do such as a re-wire, fitting chine spray rails, better motor and maybe some safety rails, but for now it does the job.
CB90 Model boat, 52 inches long performing 360 degree rotation on its own axis.
The Combat Boat 90 (CB90) is a class of fast military assault craft originally developed for the Swedish Navy by Dockstavarvet.
Powered by two 9.6v Graupner 700 turbo motors (no-longer in production).
Two Mtroniks Viper Marine 25 is a Brushed Speed Control designed specifically for use in RC model boats, it has a 25Amp motor limit and has proportional forwards and reverse functions
Some of my boats during a last weekend outing. Boats are at My Harbour. The blue boat (Fishfully Thinking") is based upon American-made Chris Craft 30 Tournament Fisherman, Stamas 32 sedan, and Bertram 28 boats. The yellow boat ("Cheapskate") is partially based upon a Bertram 31 sedan. The white vessel ("Juyilanga") was inspired on now defunct company's Uniflite 28-footer "Salty Dog" sport fisherman. Last but not least, the pink boat ("Pinkey Pie") belongs to my daughter and was built using an old Graupner kit inspired on a Chris Craft Roamer of the mid 60s. 😁
Hello Doug! Actually, not in Juyilanga but in Fishfull Thinking. I took a line here and there from our plan for the superstructure. I utilized ABS plastic instead of wood. No need to mess with fiberglassing and no cracking on the Alpine cold waters. Notice that I used the same type of hull on these two boats. Happens that Fishfull Thinking was originally another boat I had, but not happy with the superstructure, I rebuilt the whole thing but kept its fiberglass hull almost intact. Both hulls were home made by a guy in California. 😁
PT 109 was one of the hundreds of motor torpedo boats (PT) of the PT 103 class completed between 1942 and 1945 by Elco Naval Division of Electric Boat Company at Bayonne, New Jersey. The Elco boats were the largest in size of the three types of PT boats built for U.S. use during World War II. Wooden-hulled, 80 feet long with a 20-foot, 8-inch beam, the Elco PT boats had three 12-cylinder Packard gasoline engines generating a total of 4,500 horsepower for a designed speed of 41 knots. With accommodations for 3 officers and 14 men, the crew varied from 12 to 14. its full-load displacement was 56 tons. Early Elco boats had two 20mm guns, four .50-caliber machine guns, and two or four 21-inch torpedo tubes. Some of them carried depth charges or mine racks. Later boats mounted one 40mm gun and four torpedo launching racks. Many boats received ad-hoc refits at advanced bases, mounting such light guns as Army Air Forces 37mm aircraft guns and even Japanese 23mm guns. Some PTs later received rocket launchers.
This Proboat PT 109 model was brought in 2013 for £100 these boats are rare now, This one had a few faults with the propshafts they were bent and noisy both were replaced, with quality 4mm shafts, motors twin 600s were also replaced by Graupner versions along with mounts and couplings, basically all the running gear, also two ESCs by Aquapower were added and a 2.4G RC system.
A favourite model boat there must have been hundreds if not thousands made.
When I brought mine there was a choice between two sizes 36in (90cm) or 48in (120cm) and then you could choose between a wooden hull or a fibreglass hull. I went for the smaller boat with the fibreglass hull. this was back in the 1980s.
Background of the boat
The boats Perkasa class consisted of three motor torpedo boats built by Vosper (UK) for the Malaysian Navy as follows:-
Perkasa 150
Penula 151
Handalan 152
This model has 3 motors, port & starboard are Graupner 600s and one 700 type in the centre runs 3 ESCs front and rear guns operate via servos, with flashing LEDs down the barrels.
The Model is scratch built from Photos and profiles of the internet it is around 52 inches long and currently runs on two Graupner 700 turbo motors (14.4v) and dual Mtroniks 25A ESC (12v) running twin contra rotating 45mm props, this model can spin on its own axis like the real boat but does not use waterjets due to cost. Completed in 2017.
Whats a CB90
Its a Command Boat 90 originally built by Docstar in sweden and later also built in the USA under licence.
The boat has a multi role capability and has be used by the Army, Police, Coast Guard and Ambalence Service
Originally a Military craft for coastal waters and rivers with a shallow draft and powered by twin water jets this 15 ton Aluminum boat can deliver half a platoon directly on to beach heads via its landing craft type single man door at the bow.
This craft has excellent manoveraility and can crash stop ( go into full reverse and stop) in 1.5 x its length. No-wonder the american's wanted this boat.
Both Fairmile D boats 1/24 scale and are scratch built. They have both been about 6 years in operation.
MGB623 is an MGB, flying the Norwegian flag and belongs to a good friend.
Mine is MTB741. it is powered by 2 Graupner Speed 700 12V motors with NiMH batteries. The 6 pdrs and 20mm guns can rotate. it has a balsa planked hull and fibreglass skin. Decks and superstructure are also balsa. Guns are from tinplate and brass.
Excellent boats with great scale performance. I like the Fairmile Ds as they are good subjects for modelling and at static displays they always attract a lot of attention.
Motor yacht : Barracuda
Length: 905 mm
Width: 145 mm
Material: poplar plywood 3mm, balsa standard 1 mm, 1 mm linden wood, laminate fabric 120gr and 43gr.
Engine: Mig 480 7.2V
bidirectional DC 7.4V regulator
Propeller 35 mm Graupner
spruce strips 2x6mm
Cheers Colin.