Lovely size model to transport about,sails very well on water,lots of interest from the public when I displayed it on the LBES stand at warwick,even the compare was shocked when talking about individual lifeboats,he said I cannot give you any information as I don't know who's boat it is and I will have to speak to the owner as I'm stumped(the crowd laughed)

This is my scratch built Atlantis I fitted conventional gaf to main I believe it looks better and sails a dream.
I sail with the MBMBC in Heybridge Essex

Grace is my first and favourite rc model. I bought this for a bargain £70 on ebay, requiring a little care and attention. She sails beautifully and looks good in the water. She sits low and looks like a trading barge from days gone by.

Tortola at rear, Curlew in foreground.
Tortola plank (Balsa, tissued and dope) on frame, the keel and bulkheads from 10mm plywood. it has a small electric motor fitted but will have sails as well. Curlew from the Eezibuilt range. Material ply wood, Some of it from fruit crates.
The stand for Tortola made from 3 ply cardboard to my own design, stuck together with PVA glue.

HMS Nelson, scratchbuilt to 1/8" scale. Powered by two motors driving twin contrarotating shafts with three blade props. She sails on Lake Lisgar, Tillsonburg, Ontario.
I decided on Nelson as she took part in Operation Pedestal, from which I made a 1/216" waterline model of SS Ohio, the ship that saved Malta.
She took a little over 600 hours from solid chunk of basswood to launch. Probably info collection took as long!

Rascal 1mtr Yacht with a no2 set of sails on fibreglass hull & deck
sails really well in a blow

Sailing at vicar water models my local club ,needed a little trimming but it sails well in most conditions

1/12 scale kit from Metcalf moulding the most difficult part on this model was the rudder section,you have got to get it right because once fitted the deck goes on and there is no turning back,it has 2 X 550 motors on 8.4 sails very well,not to fast but not to slow either,I sail at king Lear model boat club in leicester when I get a chance,lovely big lake all type of vessels on water,eg"
: steam,electric,ic yachts what ever you like

I have made the sails & starting to put them on winch servo fitted running line is on it runs around the top of the deck

mast & booms fitted sails attached the next step is to try her out when we get a suitable day

Designer: Vic Smeed

A 1:12 scale model of a Thorneycroft RAF launch, length 43in., beam 12.5in Suitable for 2.5cc upwards. Excellent for R/C. Completely detailed on two large sheets.
Myhobbystore uk. MM412

I built this Range Safty Launch two years ago and I am now changing the hull paintwork to also include a water line. I never got around to doing this for some reason.

Range Saftey Launch

I purchased the plans for this model after my late father passed away, he too was building this model but failed to finish it before he died. My father was an Ex RAF Patrol boat pilot, hence the design was appropriate. The plans (Two sheets) are really well presented and easy to use. Each of the sheets provide ample detail to construct the basic model and if you are an experienced builder then these should suffice. However, a little research may be required to put the final touches together for the completed model (If you are a perfectionist like me). These plans are suitable for a novice as a first time project. This being my first attempt at a scale model. The boat once completed sails really well. I fitted mine out with electric motors, speed controller etc and when on the water a few heads turned! Fantastic plans GO FOR IT! Roy McCluskey

Kingston mouldings hull will post more pictures as I progress
two more pictures with the sails on they need the running lines to the drum winch then it will be ready to sail