Model Yacht Nautic from Grapner.
The hull is not original but is made of laminate. The deck is made of mahogany strips.
The boat engine is a MIG 480 powered by a Lipol 7,4V 5000mAh battery.
Nice job👍 Beautiful decking!
Crazing on the white hull looks similar to the problem I had with the clear lacquer on my Sea Scout. Surface stress?🤔
What did you use for paint / lacquer?
A short video of the first trial of my Genesis 9000 Offshore Power Boat. This is a boat to use whilst I build others.
The trial was seriously hampered by a faulty main switch. The insides must have fallen apart during transportation. I did manage to get an electrical contact to get around five minutes of the trial. The boat ran well but I will have to adjust the rudder to give more movement. Just after the video ended, the boat hit a ripple whilst turning and flipped over. No water entered the hull so all was good, except the switch now refused to work at all. The trial was ended and unfortunately will now have to wait until I return to my river in August.😤
I agree with the weight being shifted forward a iittle bit.Bow high in a catamaran will catch too much air causing the boat to flip.All it takes is a good gust of wind.Good speed on the boat.After trials you'll have a good fast boat.
I have brought the wiring home we with me. I will change the switch and take it back with me in August.
I must admit that I thought the stern was a bit low in the water. To evenly distribute the weight, I put in two batteries as suggested. I will try to move the batteries forward to change the centre of gravity.😊
More running in trials, burning fuses out, and complete radio outage and bumping the bank. However some progress made on levelling it out, full speed cannot be reached whilst trying to video by my self. 😎 The Captain "Dennis The Menace" is not a good omen, twice he's got in trouble, yesterday the cabin was flooded up to his waist.
Vosper Fire Boat (Crash Tender) a Vintage Aerokits Model 1:16 scale and is 34 inches long, produced from 1950's to 1970's.
This model uses a Vintage Ripmax Bullet 30 DC motor that can run on 24v here it is only on 14.4v it becomes lively on 16.8v.
This is a new project in the photo you see over £400 of kit to build the Tug after another £110 or so and hours of building the tug will only fetch around £250 why bother?
My uncle Peter was a flotilla leader with coastal forces in the Mediterean, in the second half of WW2 . My late father, Douglas, his brother, built the pictured MTB in 1956. it ran with i.c. power until 1962, when it was mothballed.
I recently restored and upgraded the model (brushless motors etc) and thought that it would be great to take the model all the way down a lake in Devon to demonstrate it for him. Not having any local knowledge, I put a request on this excellent site, asking for help from local guys and must say that the site has some wonderful subscribers who came forward with help and support, especially Keystone. He was brilliant and greatly contributed to make the visit a great success. thanks, mate. My uncle and the other members present greatly enjoyed it, though the windy, cold conditions rendered the rum tot most acceptable!! The photos are self explanatory. The tug was there as a rescue boat if required.
Many thanks to all Model Boats' members who responded to my request for help.
CB90 Model boat, 52 inches long performing 360 degree rotation on its own axis.
The Combat Boat 90 (CB90) is a class of fast military assault craft originally developed for the Swedish Navy by Dockstavarvet.
Powered by two 9.6v Graupner 700 turbo motors (no-longer in production).
Two Mtroniks Viper Marine 25 is a Brushed Speed Control designed specifically for use in RC model boats, it has a 25Amp motor limit and has proportional forwards and reverse functions
I plan to take her out when the weather gets better!
I'll make another video of her. maybe take my barge along as well.
My Brooklyn tug may not be completed for this season!
Much better than the hull of the ancient Billing fish cutter Gina 2 I've just started to restore and convert. Took the deck out last night to reveal the awful hull planking 🤔
Good luck, will watch with interest 👍
Cheers, Doug 😎
Named after my misses. ... wanting to know can any one help me identify what the make or model or age of the vessel is payed 40 pound for it .only missing rudder
Very similar to F1 Power Boat 1300GP260(Rainbow), http://www.fuyuanrc.com/detail.asp?id=15485
Must be at least 5 years old as SWAMBC is defunct since 2013.
'South Western Association of Model Boat Clubs'.
😎
Harbor Models Steam Generator!
I have tested the steam generator.
And it worked like it should.
It makes quite a bit of smoke!
It also smells like live steam.
It should add some great detail.
To my model tug Brooklyn!
Crazing on the white hull looks similar to the problem I had with the clear lacquer on my Sea Scout. Surface stress?🤔
What did you use for paint / lacquer?
I have a complete set 'new in box' including accesoires still waiting to come alive.